ECM43DRKN Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – .156 [3.96mm] Contact Centers, .431 Insulator Height Dip Solder/Eyelet/Right Angle

Sullins Edgecards
.156” [3.96mm] Contact Centers, .431” Insulator Height
Dip Solder/Eyelet/Right Angle
SPECIFICATIONS
• Accommodates .062” ± .008” [1.57 ± .20] PC board
• Molded-in key available
• 3 amp current rating per contact
(for 5 amp application, consult factory)
• 30 milli ohm maximum at rated current
READOUT
.265 [6.73] INSERTION DEPTH
FULL
BELLOWS
BACK-UP
SPRINGS
DUAL (D)
NUMBER
SIDE
HALF LOADED (H)
POLARIZING KEY
PLA-K1
PLM-K2
KEY IN BETWEEN CONTACTS KEY IN CONTACT
(ORDER SEPARATELY) (ORDER SEPARATELY)
.230
[5.84]
.030 .235
[0.76] _[5.97]
.092
[2.34]
.200
[5.08]
.262
[6.65]
CONSULT FACTORY FOR MOLDED-IN KEY
TERMINATION TYPE
EYELET ACCEPTS
3-#22 AWG
ALTERNATE
EYELET SHAPE
.225
[5.72]
(SE) .007[0.18]
(RE) .014[0.36]
(RA) .125 [3.18] FOR ALL POSITIONS
(SA) .270 [6.85] 02 THRU 25 POSITIONS
(SA) .230 [5.84] 28 THRU 36 POSITIONS
(SA) .190 [4.82]
43 POSITIONS
TOLERANCE: (RA) ± .025 [0.64]
(SA) ± .040 [1.00]
.185
[4.70]
.137 [3.48] (RT)
.225 [5.71] (RK)
.425 [10.80] (RY)
.137 [3.48] (RX)
.200 [5.08] (RF)
.225 [5.71] (RU)
.408 [10.40] (RP)
.050
[1.27]
.156
[3.96]
LETTER
SIDE
FITS Ø.051[1.30]
.140
[3.56]
FITS Ø
.051[1.30]
.200
[5.08]
EYELET
(SE OR RE)
RIGHT ANGLE,
DIP SOLDER
(RA, SA)
NARROW
DIP SOLDER
(RT, RK, RY)
WIDE
DIP SOLDER
(RF, RX, RU, RP)
.110±.025 [2.79±.64] (SX)
.210±.025 [5.33±.64] (SU)
AVAILABLE WITH DUAL
OR HALF LOADED
READOUT TYPE
FITS Ø
.051[1.30]
MINIMUM
CENTERED
DIP SOLDER
(SX, SU)
MOUNTING STYLE
Ø.125
[3.18]
#4-40
Ø.116 [2.95],
CLEARANCE FOR
#4 SCREW
Ø.125
[3.18]
.135
[3.43]
CLEARANCE HOLE
(H)
THREADED
INSERT (I)
FLOATING
BOBBIN (F)
NO MOUNTING EARS
(N)
SIDE MOUNTING
(S)
58
www.sullinscorp.com | 760-744-0125 | toll-free 888-774-3100 | fax [phone] | [e-mail]