E3G0402S-1 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – 1 1/2 DIAMETER 1.5 AMPS 28 VDC

SPECIFICATIONS AND ORDERING INFORMATION
E3 - SERIES
1 1/2" DIAMETER 1.5 AMPS @ 28 VDC
The E3 Series was designed to provide spring return action in an open frame
construction. Standard construction is available with 2 or 3 positions, 30°
index, and solder lug terminals.
SPECIFICATIONS
ELECTRICAL
Current and Voltage Rating: Make and break resistive load
1.5 amps @ 28 VDC; 0.5 amp @ 115 VAC.
Current Carrying Capacity: 9 amps.
Dielectric Strength: 1,500 VAC between current carrying parts and
ground.
Contact Resistance: Average initial 3.5 milliohms.
Insulation Resistance: In excess of 750,000 megohms.
Hardware: Mounting nut and lockwasher are shipped assembled.
MECHANICAL
Materials and Finishes: All parts utilize non-corrosive materials
as standard.
Clips and Rotors: Brass with silver plate as standard.
Insulation: Glass epoxy.
Index: Coil spring.
Index Life: 25,000 cycles minimum.
Index Torque: Switches have lowest practical torque consistent
with crisp detenting and smooth, reliable operation.
Index Angles: Positive 30° standard.
Index Stops: Fixed stops standard.
Stop Strength: 25 in. lbs. minimum.
STANDARD PART NUMBER
SPRING RETURN
SWITCHES - 30° INDEXING - FIXED STOPS - SOLDER LUG TERMINALS
ACTIVE POLES/ NO. OF
POLES POSITIONS SECTION SECTIONS
04
02
4
1
06
03
3
2
06
03
3
2
SHORTING
E3G0402S-1
E3G0603S-2
E3G0603S-3
NON-
SHORTING
E3G0402N-1
E3G0603N-2
E3G0603N-3
DESCRIPTION
.......... SPRING RETURN FROM CLOCKWISE.
.......... SPRING RETURN BOTH SIDES TO CENTER.
.......... SPRING RETURN CLOCKWISE TO CENTER, POSITIVE INDEX COUNTER CLOCKWISE OF CENTER.
E
DIMENSIONS
STANDARD CONSTRUCTION
E3G - GLASS EPOXY CONSTRUCTION
1.187
1.187
UNIT OF ELECTRO SWITCH CORP.
2010 Yonkers Road
• ELECTRONIC PRODUCTS
Raleigh, NC 27604
Telephone: (888) ROTARYS or [phone]
Fax: [phone] or [phone] 39