DRRJ45T8 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – RJ ADAPTERS CABLES

Tel [phone]
Fax [phone]
www.redlion-controls.com
RJ ADAPTERS & CABLES
Bulletin No. DRRJ-C
Drawing No. LP0554
Released 7/03
ORDERING INFORMATION
MODEL
DRRJ
CBJ
CBL
DESCRIPTION
RJ-11/12 Connector to Terminal Adapter
RJ-45 Connector to Terminal Adapter
RJ-45 Parallel Connector
RJ-11 to RJ-11 6" Jumper Cable
RJ-12 to RJ-12 1' Cable
RJ-12 to RJ-12 10' Cable
RJ-45 to RJ-45 1' Cable
RJ-45 to RJ-45 10' Cable
RJ-45 to RJ-45 6" Jumper Cable
PART NUMBER
DRRJ11T6
DRRJ45T8
DRRJ45P6
CBJ11BD5
CBLRLC01
CBLRLC02
CBLRLC03
CBLRLC04
CBLRLC07
DRRJ11T6 and DRRJ45T8 Connector to Terminal Adapters
DESCRIPTION
These adapters convert modular RJ-style connectors to terminal
block connectors, providing a rugged means by which standard
shielded cabling can be used in lieu of flat, unshielded cable. The
DRRJ11T6 can be used with RJ-11 or RJ-12 cables, while the
DRRJ45T8 can be used with RJ-45 connectors. The adapters are
designed to mount on any standard DIN rail.
Each screw-terminal accepts wire in size from 26 to 14 AWG (0.14
to 2.5 mm solid; 0.14 to 1.5 mm stranded). Terminal numbers for the
screw-terminals correspond directly to the terminal pin out of the RJ
connector. There is an extra terminal on each block labeled “S” for the
connection of shields.
APPLICATION EXAMPLES
RS485 via RJ-11 connector and DRRJ11T6
Product Examples: DLC, IAMS, ITMS, and PAX.
RJ-11 DIMENSIONS In inches (mm)
A Red Lion Controls device with an RS485 RJ-11 port is connected to the
DRRJ11T6 adapter using the CBJ11BD5 cable. The terminal block is then
wired to run the RS485 MODBUS serial information to another device.
RS232 via RJ-12 connector and DRRJ11T6
Product Examples: G3, Modular Controller, and Paradigm (CL,
CX, GL, TX, and VX)
A Red Lion Controls device with an RS232 RJ-12 port is connected to the
DRRJ11T6 adapter using the CBLRLC01 or CBLRLC02 cable. The terminal
block is then wired to run the RS232 serial information to another device.
1