DP2-41N Datasheet, PDF (1/15 Pages) List of Unclassifed Manufacturers – High-performance Digital Pressure Sensor

DP2 SERIES
High-performance Digital Pressure Sensor
Digital Automaticsensitivity With analog
setting
output
Complete functionality!
Selection from a wide
lineup
* Passed the UL 991 Environment Test
* UL 61010C-1 compatible, Passed the UL 991 Environment Test based on SEMI S2-0200.
[Category applicable for semiconductor manufacturing: TWW2, Process Equipment]
[Applicable standards: UL 61010C-1]
[Additional test / evaluation standards as per intended use: UL991, SEMI S2-0200]
Conforming to
EMC Directive
UL Recognition
(Excluding 5 m cable length type)
High accuracy • high resolution • high speed
It achieves a 2.5 ms, or less, response
time at a high resolution of 1/1,000.
It enables highly accurate sensing with its
excellent repeatability and temperature
characteristics.
Clearly visible LED display with 3¹/2 digits
Bright red LED 7-segment display having 3¹/2
digits, 10 mm 0.394 in high. The displayed
figures are remarkably noticeable not only in
a dark area, but also in a well-lit place.
Setting with easy key operation
Initialization and threshold value
settings are easily done by key
operation while seeing the values on
the display.
Response time
2.5 ms or less
Repeatability Temperature characteristics
Within×¢0.2 % F.S.×¢1 digit
Within×¢1 % F.S.
Incorporates
minus sign
’מ‘
indication
Four output modes enable versatile pressure level control
Selection from six pressure units
1 Hysteresis mode
Hysteresis
ON
Comparative
Output 1 _OFF
ON
Comparative
Output 2 OFF
0 _{Set Value 1 (P-1) Set Value 2 (P-2)}
High pressure (Positive pressure type)
High vacuum (Vacuum pressure type)
The common hysteresis of the comparative
outputs can be set, as desired, with the set values.
3 Dual output mode
Hysteresis
ON
Comparative
Output 1 OFF
ON
Comparative
Output 2 OFF
0 Set Value 1 (P-1) Set Value 2 (P-2)
High pressure (Positive pressure type)
High vacuum (Vacuum pressure type)
The outputs can be put to different use, such as,
detection of different kinds of objects, control
function, alarm function etc.
2 Window comparator mode
ON
Comparative
Output 1 OFF
ON
Comparative
Output 2 OFF
Hysteresis
Hysteresis
0 Set Value 1 (P-1) Set Value 2 (P-2)
High pressure (Positive pressure type)
High vacuum (Vacuum pressure type)
The comparative outputs can be turned ON or
OFF by a pressure which is within the pressure
range set by Set Value 1 and Set Value 2.
4 Automatic sensitivity setting mode
Hysteresis
ON
Comparative
Output 1 OFF
ON
Comparative
Output 2 OFF
0 _{Set Value 1 (P-1) Set Value 2 (P-2)}
Set Value 3 (P-3)
High pressure (Positive pressure type)
High vacuum (Vacuum pressure type)
Using actual objects, if the pressure values for OK
objects and NG objects are input, then the sensor
is automatically set to the optimum pressure value
(mid-value).
The pressure unit can be selected
from six different systems to suit your
requirement.
( ) The selectable pressure units differ
with the sensor type. When the pres-
sure unit is changed, the measured
pressure value and the set values
are automatically converted.
inHg
International
System of
Units (SI)
kPa (Note)
kgf/cm²
mmHg
psi
bar
: Vacuum pressure type
: Positive pressure type
Note: ‘MPa’ in case of DP2-22Ⅺ, DP2-42Ⅺ and
DP2-62Ⅺ.
792