|
DMR01 Datasheet, PDF (1/13 Pages) List of Unclassifed Manufacturers – Low Power Digital Multichannel Receiver | |||
|
June 2003
Datasheet
DMR01
Low Power Digital Multichannel Receiver
FEATURES
⢠LOW COST
⢠MICRO POWER
⢠DESIGNED FOR DBPSK CODED DATA
⢠ERROR CORRECTING DECODER
⢠DIFFERENT TRANSMIT FREQUENCIES
⢠UNLICENSED FREQUENCY BAND
⢠DIFFERENT DATA RATES
⢠SHORT RANGE APPLICATIONS (up to 3m/10ft)
⢠TSSOP20 PACKAGE
APPLICATIONS
⢠BATTERY POWERED SYSTEMS
⢠WIRELESS DATA TRANSMISSION
⢠ACCESS CONTROL
⢠ALARM FUNCTIONS
⢠WIRELESS INTERFACE
⢠REMOTE CONTROL
⢠WIRELESS TRANSMISSIONS THROUGH
CONDUCTING FLUIDS
General Description
The DMR01 is a micro power receiver chip for low frequency data transmission systems. Based on a 32 kHz
clock source, 8 different carrier frequencies from 8.192 kHz to 122.88 kHz are possible (fcr = (2n+1) x 8192
Hz, n = 0..7). Depending on the transmit distance and the transmit time, the DMR01 works with 4 different
data rates from 1 to 8 kBaud. The DMR01 is able to receive coded data until with a maximum length of 128
bit for each transmit package. A frame detector gives the possibility to separate the data for different
applications. The DMR01 uses a serial SPI register for a simple data exchange with external
microcontrollers. Features like input amplifier gain, ADC sensitivity, data rate, selection of coded or uncoded
data are programmable via the SPI interface.
Block Diagram
page 1 / 13
|
▷ |