DLPO-1_15 Datasheet, PDF (1/13 Pages) PETERMANN-TECHNIK – Differential Oscillator for Low Cost

PETERMANN-TECHNIK GmbH
Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech
Tel: [phone] ∙ Fax: [phone]
[e-mail] ∙ www.petermann-technik.com
HIGH PERFORMANCE DIFFERENTIAL OSCILLATOR
SERIES „DLPO-1“
1.0—220. MHz
FEATURES
+ 100% pin-to-pin drop-in replacement to quartz and MEMS based XO
+ Differential Oscillator for Low Cost
+ Low Power Consumption / ST option for reducing power consumption
+ Extremely low RMS jitter
+ Excellent long time reliability
+ LVCMOS, LVPECL, LVDS, HCSL, CML output signal
+ Very tight frequency stability as low as ±10 ppm possible
+ Outstanding long term aging
+ Supply voltage 1.8, 2.5 or 3.3V—others, please contact us
+ Industry-standard packages: 5.0x3.2; 7.0x5.0 mm
+ Pb-free, RoHS and REACH compliant / MSL1@260°C
APPLICATIONS
+ Server, Router, RAID controller
+ Gigabit Ethernet, 10 Gigabit Ethernet, Fiber Channel
+ SATA / SAS,PCI-Express, Fully Buffered DIMM
+ System clock, Networking and computing
+ etc.
PIN DESCRIPTION
TOP VIEW
PIN
SYMBOL
1
ST/OE
2
NC
3
GND
4
OUT+
5
OUT-
6
VDD
Input
NA
Power
Output
Output
Power
FUNCTIONALITY
Standby or Output Enable pin for OUT+ and OUT-.
OE:
When High or Open : OUT+ and OUT- = active
When Low : OUT+ and OUT- = High Impedance state
ST:
When High or Open : OUT+ and OUT- = active
When Low : OUT+ and OUT- = Output is low (weak pull
down), oscillation stops
Do Not connect pin, leave it floating.
VDD power supply ground. Connect to Ground
1 to 220 MHz programmable clock output.
Power Supply Voltage
OE/ST ₁
NC 2
GND 3
6 ^VDD
5 OUT-
4 OUT+
CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS
PAGE 1 OF 13 I SPEC 01 I REV.00 I NOVEMBER 2014