DFLS120L_1 Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER

DFLS120L
1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
PowerDI ^ä123
Features
· Guard Ring Die Construction for Transient Protection
· Low Power Loss, High Efficiency
· Patented Interlocking Clip Design for High Surge Current
Capacity
· High Current Capability and Low Forward Voltage Drop
· Lead Free Finish, RoHS Compliant (Note 4)
· "Green" Molding Compound (No Br, Sb)
· Qualified to AEC-Q101 Standards for High Reliability
Mechanical Data
· Case: PowerDI^ä123
· Case Material: Molded Plastic, “Green” Molding
Compound. UL Flammability Classification Rating 94V-0
· Moisture Sensitivity: Level 1 per J-STD-020C
· Terminal Connections: Cathode Band
· Terminals: Finish – Matte Tin annealed over Copper
leadframe. Solderable per MIL-STD-202,
Method 208 e3
· Marking & Type Code Information: See Last Page
· Weight: 0.01 grams (approximate)
· Ordering Information: See Last Page
TOP VIEW
BOTTOM VIEW
Maximum Ratings ^{@ T}A ^{= 25°C unless otherwise specified}
Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Forward Current
Non-Repetitive Peak Forward Surge Current 8.3ms
single half sine-wave superimposed on rated load
Symbol
V_RRM
VRWM
V_R
V_R(RMS)
I_F(AV)
I_FSM
Value
20
14
1.0
50
Thermal Characteristics
Characteristic
Power Dissipation (Note 1)
Power Dissipation (Note 2)
Thermal Resistance Junction to Ambient (Note 1)
Thermal Resistance Junction to Ambient (Note 2)
Thermal Resistance Junction to Soldering (Note 3)
Operating Temperature Range
Storage Temperature Range
Symbol
PD
P_D
RqJA
R_qJA
RqJS
T_j
TSTG
Value
1.67
556
60
180
10
-55 to +125
-55 to +150
Notes:
1. Part mounted on 50.8mm X 50.8mm GETEK board with 25.4mm X 25.4mm copper pad, 25% anode, 75% cathode. T_A = 25°C.
2. Part mounted on FR-4 board with 1.8mm X 2.5mm cathode and 1.8mm X 1.2mm anode, 1 oz. copper pads. TA = 25°C.
3. Theoretical RqJS calculated from the top center of the die straight down to the PCB/cathode tab solder junction.
4. RoHS revision 13.2.2003. High Temperature Solder Exemptions Applied, see EU Directive Annex Note 7.
Unit
V
V
A
A
Unit
W
mW
°C/W
°C/W
°C/W
°C
°C
DS30444 Rev. 4 - 2
PowerDI is a trademark of Diodes Incorporated.
1 of 3
www.diodes.com
DFLS120L
ã Diodes Incorporated