D9G0123S Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – 2 5/16 DIAMETER 1.5 AMPS 28 VDC

D9 - SERIES
SPECIFICATIONS AND ORDERING INFORMATION
2 5/16" DIAMETER 1.5 AMPS @ 28 VDC
The D9 Series has a 15° index with a maximum of 24 positions.
Indexing is provided by a dual-ball hill and valley design. Standard
features include solder lug terminals, adjustable stops and glass
epoxy insulation.
SPECIFICATIONS
ELECTRICAL
Current and Voltage Rating: Make and break resistive load
1.5 amps @ 28 VDC; 0.25 amp @ 115 VAC.
Current Carrying Capacity: 9 amps.
Dielectric Strength: 1,000 VAC between current carrying parts and
ground.
Contact Resistance: Average initial 5 milliohms.
Insulation Resistance: In excess of 750,000 megohms.
Hardware: Mounting nut and lockwasher are shipped assembled.
MECHANICAL
Materials and Finishes: All parts utilize non-corrosive materials
as standard.
Clips and Rotors: Brass with silver plate as standard.
Insulation: Glass epoxy.
Index: Dual-ball, hill and valley design.
Index Life: 25,000 cycles minimum.
Index Torque: Switches have lowest practical torque consistent
with crisp detenting and smooth, reliable operation.
Index Angles: Positive 15° standard.
Index Stops: Adjustable standard, fixed or continuous.
Stop Strength: 25 in. lbs. minimum.
D _{STANDARD PART NUMBER}
GLASS EPOXY INSULATION
SWITCHES - 15° INDEXING
ADJUSTABLE STOPS - SOLDER LUG TERMINALS - STOPS SET @ 2 POS.
ACTIVE POLES/ NO. OF
POLES POSITIONS SECTION SECTIONS
01
02-23
02
02-23
03
02-23
04
02-23
05
02-23
06
02-23
07
02-23
08
02-23
1
1
1
2
1
3
1
4
1
5
1
6
1
7
1
8
SHORTING
NON-
FIG.
* ^SHORTING
D9G0123S D9G0123N DU
D9G0223S D9G0223N DU
D9G0323S D9G0323N DU
D9G0423S D9G0423N DU
D9G0523S D9G0523N DU
D9G0623S D9G0623N DU
D9G0723S D9G0723N DU
D9G0823S D9G0823N DU
DIMENSIONS
* FIGURES ARE SHOWN ON PAGE 57.
STANDARD CONSTRUCTION
D9G - GLASS EPOXY
CONSTRUCTION
2010 Yonkers Road
• ELECTRONIC PRODUCTS
Raleigh, NC 27604
34
UNIT OF ELECTRO SWITCH CORP.
Telephone: (888) ROTARYS or [phone]
Fax: [phone] or [phone]