|
D9412G Datasheet, PDF (1/8 Pages) List of Unclassifed Manufacturers – Control/Communicators | |||
|
D9412G/D7412G
Specifications
Control Features
⢠Eight programmable areas, each with
perimeter/interior partitioning. Regular, master,
associate, or shared option by area
⢠Real-time clock and test timer
⢠Up to 1000-event log, including time, date and
event with area, point and user number
⢠Battery charging circuit; AC power, voltage and
ground fault supervision
⢠Automatic reset circuit protectors
⢠On-board CPU watchdog warning buzzer and
diagnostic LEDs
⢠Lightning and EMI protection
⢠Power limited external circuits
Communicator
⢠Built-in digital communicator with phone line
monitor (loop or ground start)
⢠Multiple telephone numbers, primary and duplicate
paths with main and alternate destinations
⢠All reports within each 4 route groups are
programmable
⢠Optional dual phone line switcher monitors 2 phone
lines
⢠Automatic test and status reports
⢠Time windows for arming and open/close report
suppression
⢠Programmable answering machine work-around for
remote programming on shared phone line
Programmable Outputs
⢠2-amp alarm power @ 12 VDC
⢠1.4-amp aux power @ 12 VDC
⢠4 alarm output patterns
⢠Automatic bell test
⢠Programmable bell shut-off timer
⢠D7412G: 67 programmable outputs
⢠D9412G: 131 programmable outputs
System Response
⢠D7412G: 75 points, 8 on-board, up to 67 off-board
⢠D9412G: 246 points, 8 on-board, up to 238 off-
board
⢠31 custom point indexes, including fire supervisory
⢠Selectable point response time
⢠Fire alarm verification
⢠Fire inspectorâs local test
⢠Watch mode
⢠Scheduled events (Skeds) arm, disarm, bypass and
unbypass points, control relays, control authority
levels, control door access and more
Control/Communicators
User Interface
⢠Supervises up to 8 command centers (up to 32
non-supervised command centers can be used)
⢠Custom command center text
⢠D7412G: 4 custom functions
⢠D9412G: 16 custom functions
⢠Full function command menu including custom
functions
⢠D7412G: 99 Users
⢠D9412G: 249 Users
⢠Each user has authority by area and 16-character
name
⢠14 custom authority levels control userâs authority
to change, add, delete passcodes or access control
tokens/cards, disarm, bypass points, initiate system
tests, and more
⢠Adjustable brightness/loudness for command
center display/ sounder
⢠D7412G: 1 parallel printer
⢠D9412G: 3 parallel printers
Access Control
⢠D7412G: 2 access control doors and 396
tokens/cards
⢠D9412G: 8 access control doors and 996
tokens/cards
⢠Custom door strike, point shunt and auto disarming
response by area
⢠Logging options for: Access Granted, No Entry,
Request to Exit and Request to Enter
⢠14-panel wide access levels with both manual and
scheduled control
|
▷ |