D7G0111S Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – 1 7/8 DIAMETER 2.25 AMPS 28 VDC

D7 - SERIES
SPECIFICATIONS AND ORDERING INFORMATION
1 7/8" DIAMETER 2.25 AMPS @ 28 VDC
The D7 Series, constructed with a dual-ball, hill and valley index, has in-
creased the physical size of the switch conductors allowing for additional
current carrying capabilities. Standard designs utilize glass epoxy or ceramic
insulations, solder lug terminals, and 30° adjustable stop indexing.
SPECIFICATIONS
ELECTRICAL
Current and Voltage Rating: Make and break resistive load
2.25 amps @ 28 VDC; 1.0 amp @ 115 VAC.
Current Carrying Capacity: 9 amps.
Dielectric Strength: 1,500 VAC between current carrying parts and
ground.
Contact Resistance: Average initial 3 milliohms.
Insulation Resistance: Glass in excess of 750,000 megohms.
Ceramic in excess of 1,000,000 megohms.
Hardware: Mounting nut and lockwasher are shipped assembled.
MECHANICAL
Materials and Finishes: All parts utilize non-corrosive materials
as standard.
Clips and Rotors: Brass with silver plate as standard.
Insulation: Glass epoxy, or ceramic.
Index: Dual-ball, hill and valley design.
Index Life: 25,000 cycles minimum.
Index Torque: Switches have lowest practical torque consistent
with crisp detenting and smooth, reliable operation.
Index Angles: Positive 30° standard, 60° available.
Index Stops: Adjustable standard, fixed or continuous.
Stop Strength: 25 in. lbs. minimum.
STANDARD PART NUMBER
D
GLASS EPOXY INSULATION
SWITCHES - 30° INDEXING
CERAMIC INSULATION
SWITCHES - 30° INDEXING
ADJUSTABLE STOPS - SOLDER LUG TERMINALS - STOPS SET @ 2 POS.
ADJUSTABLE STOPS - SOLDER LUG TERMINALS - STOPS SET @ 2 POS.
ACTIVE POLES/ NO. OF SHORTING
NON-
FIG.
ACTIVE POLES/ NO. OF SHORTING
NON-
FIG.
POLES POSITIONS SECTION SECTIONS
* ^SHORTING
POLES POSITIONS SECTION SECTIONS
* ^SHORTING
01
02-11
1
1
D7G0111S D7G0111N DA
01
02-11
1
1
D7C0111S D7C0111N DA
02
02-11
1
2
D7G0211S D7G0211N DA
02
02-11
1
2
D7C0211S D7C0211N DA
02
02-05
2
1
D7G0205S D7G0205N DH
02
02-05
2
1
D7C0205S D7C0205N DH
03
02-11
1
3
D7G0311S D7G0311N DA
03
02-11
1
3
D7C0311S D7C0311N DA
03
02-03
3
1
D7G0303S D7G0303N DM
03
02-03
3
1
D7C0303S D7C0303N DM
04
02-11
1
4
D7G0411S D7G0411N DA
04
02-05
2
2
D7C0405S D7C0405N DH
04
02-05
2
2
D7G0405S D7G0405N DH
06
02-05
2
3
D7C0605S D7C0605N DH
05
02-11
1
06
02-05
2
5
D7G0511S D7G0511N DA
06
02-03
3
D7G0605S D7G0605N DH
3
2
D7C0603S D7C0603N DM
60° INDEXING
06
02-03
3
2
D7G0603S D7G0603N DM
01
02-06
1
1
________ D7C0106N-60 DK
06
02-11
1
6
D7G0611S D7G0611N DA
02
02-06
1
2
________ D7C0206N-60 DK
08
02-05
2
4
D7G0805S D7G0805N DH
03
02-06
1
3
________ D7C0306N-60 DK
09
02-03
3
3
D7G0903S D7G0903N DM
04
02-06
1
4
________ D7C0406N-60 DK
10
02-05
2
5
D7G1005S D7G1005N DH
05
02-06
1
5
________ D7C0506N-60 DK
* FIGURES ARE SHOWN ON PAGES 55 AND 56.
DIMENSIONS
STANDARD CONSTRUCTION
D7G - GLASS EPOXY CONSTRUCTION
* .500 FOR DESIGNS OF FIVE OR
MORE SECTIONS
2010 Yonkers Road
• ELECTRONIC PRODUCTS
Raleigh, NC 27604
30
UNIT OF ELECTRO SWITCH CORP.
Telephone: (888) ROTARYS or [phone]
Fax: [phone] or [phone]