English
Language : 

D63696475024 Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – Display Receiver with Limit Outputs
Display Receiver with Limit Outputs
Type D 6369 6475
Du line®
Fieldbus Installationbus
• 4-digit 7-segment LED-display with sign
• Freely scaleable
• 2 relay limit outputs (HI, LO)
• 2 NPN transistor limit outputs (HIHI, LOLO)
• LED-indication for all limit outputs
• Automatic or manual reset of limit outputs
• Protocol selectable (3 1/2-digit BCD, 4-digit BCD,
8 bit binary)
• Multiplex or normal mode
• Internal or external selection of multiplex address
• AC power supply
Product Description
Freely scaleable Dupline® 4
digit LED-display with sign,
for panel mounting. Readout
of analog signals, counter
values or time. 4 limit outputs
with LED-indication. Protocol
selectable (3 1/2 digit BCD,
4-digit BCD, 8 bit binary)
Ordering Key
Type: Dupline®
Type no.
Supply
D 6369 6475 024
Type Selection
Supply
24 VAC
115/230 VAC
No code module required
Ordering no.
8/16 channels
4-digit LED
D 6369 6475 024
D 6369 6475 230
Input/Output Specifications
Inputs
Limit output reset
Multiplex address selection
Open loop voltage
Short circuit current
Contact resistance
Cable length
Dielectric voltage
Inputs - Dupline®
Inputs - Relay outputs
Inputs - Transistor outputs
1 contact or NPN transistor
4 contacts or NPN transistors
5 VDC
50 µA
≤ 10 Ω
≤2m
≥ 500 VAC (rms)
≥ 4 kVAC (rms)
≥ 4 kVAC (rms)
HI, LO - limit outputs
2 SPST relays
Isolated in groups of
2x1
Contact ratings (AgCd0)
µ (micro gap)
Resistive load
AC1 5 A/250 VAC (1100VA)
DC1 0.25 A/250 VDC (62 W)
or 5 A/25 VDC (125 W)
Inductive loads AC15 2.5 A/230 VAC
DC13 5 A/24 VDC
Mechanical life
≥ 30 x 106 operations
Electrical life (max. load)AC1 ≥ 2.5 x 105 operations
Operating frequency
≤ 7200 operations/h
Dielectric voltage
Outputs - Dupline®
≥ 4kVAC (rms)
Outputs - transistor outputs ≥ 4kVAC (rms)
Display
Display format
Display range
Display type
Height of digits
Display colour
Change of sign (automatic)
Decimal point
Scaling feature
Multiplex feature
Display test
Transmission protocol
Limit values
Settings
Channel address
Multiplex address (internal)
Scaling
Decimal point position
Limit values
Normal/multiplex mode
Enable/disable limit outputs
Transmission protocol
Internal/external selection of
multiplex address
Automatic/manual reset of
limit outputs
7-segment
-9999 to +9999 (4 digits)
LED
14.2 mm
Red
Yes
Configurable by keys
Yes
Yes
Yes
3 1/2, 4-digit BCD,
8 bit binary
4 (HIHI, HI, LO, LOLO)
Keys and display
Keys and display
Keys and display
Keys and display
Keys and display
Keys and display
Keys and display
2 DIP switches
1 DIP switch
1 DIP switch
Specifications are subject to change without notice (12.10.05)
1
Dupline® is a registered trademark. A product of the CARLO GAVAZZI Group