D4G0111S Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – 1.437 DIAMETER 1.5 AMPS 28 VDC

D4 - SERIES
SPECIFICATIONS AND ORDERING INFORMATION
1.437" DIAMETER 1.5 AMPS @ 28 VDC
The D4 Series switch is the most economical and versatile switch in our
open frame rotary line. This series offers the quality feel of a ball and spring
index mechanism and is available with up to 12 positions and 30° or 60°
indexing.
SPECIFICATIONS
ELECTRICAL
Current and Voltage Rating: Make and break resistive load
1.5 amps @ 28 VDC; 0.5 amp @ 115 VAC.
Current Carrying Capacity: 9 amps.
Dielectric Strength: 1,500 VAC between current carrying parts and
ground.
Contact Resistance: Average initial 3.5 milliohms.
Insulation Resistance: Glass epoxy in excess of 750,000 megohms.
Ceramic in excess of 1,000,000 megohms.
Diallyl in excess of 900,000 megohms.
Hardware: Mounting nut and lockwasher are shipped assembled.
MECHANICAL
Materials and Finishes: All parts utilize non-corrosive materials
as standard.
Clips and Rotors: Brass with silver plate as standard.
Insulation: Glass epoxy, ceramic, or diallyl phthalate.
Index: Single-ball, hill and valley.
Index Life: 25,000 cycles minimum.
Index Torque: Switches have lowest practical torque consistent
with crisp detenting and smooth, reliable operation.
Index Angles: Positive 30° standard, 60° available.
Index Stops: Adjustable standard, fixed or continuous.
Stop Strength: 10 in. lbs. minimum.
D ^{STANDARD PART NUMBER}
GLASS EPOXY INSULATION
SWITCHES - SOLDER LUG TERMINALS - 30° INDEX - ADJUSTABLE STOPS
CERAMIC INSULATION
SWITCHES - SOLDER LUG TERMINALS - 30° INDEX - ADJUSTABLE STOPS
ACTIVE POLES/ NO. OF SHORTING NON- FIG.
* ^{POLES POSITIONS SECTION SECTIONS}
SHORTING
01
02-11
1
1
D4G0111S D4G0111N DA
02
02-11
1
2
D4G0211S D4G0211N DA
02
02-05
2
1
D4G0205S D4G0205N DG
03
02-11
1
3
D4G0311S D4G0311N DA
03
02-03
3
1
D4G0303S D4G0303N DM
04
02-11
1
4
D4G0411S D4G0411N DA
04
02-05
2
2
D4G0405S D4G0405N DG
05
02-11
1
5
D4G0511S D4G0511N DA
06
02-11
1
6
D4G0611S D4G0611N DA
06
02-05
2
3
D4G0605S D4G0605N DG
06
02-03
3
2
D4G0603S D4G0603N DM
09
02-03
3
3
D4G0903S D4G0903N DM
ACTIVE POLES/ NO. OF SHORTING NON- FIG.
* ^{POLES POSITIONS SECTION SECTIONS}
SHORTING
01
02-12
1
1
D4C0112S D4C0112N DD
02
02-12
1
2
D4C0212S D4C0212N DD
02
02-06
2
1
D4C0206S D4C0206N DL
03
02-12
1
3
D4C0312S D4C0312N DD
03
02-05
3
1
D4C0305S D4C0305N DO
04
02-12
1
4
D4C0412S D4C0412N DD
04
02-06
2
2
D4C0406S D4C0406N DL
05
02-12
1
5
D4C0512S D4C0512N DD
05
02-03
5
1
D4C0503S D4C0503N DR
06
02-12
1
6
D4C0612S D4C0612N DD
06
02-06
2
3
D4C0606S D4C0606N DL
06
02-05
3
2
D4C0605S D4C0605N DO
* FIGURES ARE SHOWN ON PAGES 55 AND 56.
DIMENSIONS
STANDARD CONSTRUCTION
D4G - STANDARD GLASS EPOXY CONSTRUCTION
2010 Yonkers Road
• ELECTRONIC PRODUCTS
Raleigh, NC 27604
24
UNIT OF ELECTRO SWITCH CORP.
Telephone: (888) ROTARYS or [phone]
Fax: [phone] or [phone]