D3G0111S Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – 1 5/16 DIAMETER 1.5 AMPS 28 VDC

D3 - SERIES
SPECIFICATIONS AND ORDERING INFORMATION
1 5/16" DIAMETER 1.5 AMPS @ 28 VDC
The D3 Series was originally designed as a high quality military switch, but is
ideal for use in both military and commercial equipment applications. The
standard features of this hill and valley design are glass epoxy insulation and
a 30° index, with options of ceramic and diallyl insulation and a 60° index.
SPECIFICATIONS
ELECTRICAL
Current and Voltage Rating: Make and break resistive load
1.5 amps @ 28 VDC; 0.5 amp @ 115 VAC.
Current Carrying Capacity: 9 amps.
Dielectric Strength: 1,000 VAC between current carrying parts and
ground.
Contact Resistance: Average initial 3.5 milliohms.
Insulation Resistance: Glass in excess of 750,000 megohms.
Ceramic in excess of 1,000,000 megohms.
Diallyl in excess of 900,000 megohms.
Hardware: Mounting nut and lockwasher are shipped assembled.
MECHANICAL
Materials and Finishes: All parts utilize non-corrosive materials.
Clips and Rotors: Silver alloy standard on ceramic.
Brass with silver plate standard on glass.
Insulation: Glass epoxy, ceramic, or diallyl phthalate.
Index: Single-ball, hill and valley.
Index Life: 25,000 cycles minimum.
Index Torque: Switches have lowest practical torque consistent
with crisp detenting and smooth, reliable operation.
Index Angles: Positive 30° standard, 60° available.
Index Stops: Adjustable standard, fixed or continuous.
Stop Strength: 25 in. lbs. minimum.
D _{STANDARD PART NUMBER}
EPOXY GLASS INSULATION - BRASS SILVER PLATE
CERAMIC INSULATION - SILVER ALLOY - 2.6 AMPS @ 28 VDC
SWITCHES - SOLDER LUG TERMINALS - 30° INDEX - ADJUSTABLE STOPS SET @ 2 POS. SWITCHES - SOLDER LUG TERMINALS - 30° INDEX - ADJUSTABLE STOPS SET @ 2 POS.
ACTIVE POLES/ NO. OF SHORTING NON- FIG.
POLES POSITIONS SECTION SECTIONS
01
02-11
1
1 D3G0111S
* ^SHORTING
D3G0111N DA
02
02-11
1
2 D3G0211S D3G0211N DA
02
02-05
2
1 D3G0205S D3G0205N DH
03
02-11
1
3 D3G0311S D3G0311N DA
03
02-03
3
1 D3G0303S D3G0303N DM
04
02-05
2
2 D3G0405S D3G0405N DH
06
02-03
3
2 D3G0603S D3G0603N DM
06
02-05
2
3 D3G0605S D3G0605N DH
ACTIVE POLES/
POLES POSITIONS SECTION
01
02-11
1
02
02-11
1
02
02-05
2
03
02-11
1
03
02-03
3
04
02-05
2
06
02-03
3
06
02-05
2
NO. OF SHORTING NON-
SECTIONS
SHORTING
1 D3C0111S
2 D3C0211S
1 D3C0205S
3 D3C0311S
1 D3C0303S
2 D3C0405S
2 D3C0603S
3 D3C0605S
D3C0111N
D3C0211N
D3C0205N
D3C0311N
D3C0303N
D3C0405N
D3C0603N
D3C0605N
FIG.
*
DA
DA
DH
DA
DM
DH
DM
DH
DIMENSIONS
* FIGURES ARE SHOWN ON PAGES 55 AND 56.
STANDARD CONSTRUCTION
D3G - GLASS EPOXY CONSTRUCTION
2010 Yonkers Road
• ELECTRONIC PRODUCTS
Raleigh, NC 27604
22
UNIT OF ELECTRO SWITCH CORP.
Telephone: (888) ROTARYS or [phone]
Fax: [phone] or [phone]