English
Language : 

D2D0112S Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – 1 DIAMETER 0.55 AMP 28 VDC
D2 - SERIES
SPECIFICATIONS AND ORDERING INFORMATION
1" DIAMETER 0.55 AMP @ 28 VDC
The D2 Series switch is used where space is at a premium. This dual-ball
side thrust index offers exceptional torque control and is available in 30°, 36°,
45°, and 60° angles. Standard designs utilize diallyl phthalate or ceramic
insulation, solder lug terminals, and 30° adjustable stop indexing.
SPECIFICATIONS
ELECTRICAL
Current and Voltage Rating: Make and break resistive load
0.55 amp @ 28 VDC; 0.25 amp @ 115 VAC.
Current Carrying Capacity: 7 amps.
Dielectric Strength: 750 VAC between current carrying parts and
ground.
Contact Resistance: Average initial 5 milliohms.
Insulation Resistance: Diallyl in excess of 900,000 megohms.
Glass in excess of 750,000 megohms.
Ceramic in excess of 1,000,000 megohms.
Hardware: Mounting nut and lockwasher are shipped assembled.
MECHANICAL
Materials and Finishes: All parts utilize non-corrosive materials
as standard.
Clips and Rotors: Brass with silver plate as standard.
Insulation: Diallyl phthalate, glass, or ceramic.
Index: Dual-ball, side thrust design.
Index Life: 25,000 cycles minimum.
Index Torque: Switches have lowest practical torque consistent
with crisp detenting and smooth, reliable operation.
Index Angles: Positive 30° standard, 36°, 45°, and 60° available.
Index Stops: Adjustable standard, fixed or continuous.
Stop Strength: 10 in. lbs. minimum.
D STANDARD PART NUMBER
DIALLYL PHTHALATE INSULATION - ADJUSTABLE STOPS
SWITCHES - SOLDER LUG TERMINALS - 30° INDEX - SET @ 2 POS.
CERAMIC INSULATION - ADJUSTABLE STOPS
SWITCHES - SOLDER LUG TERMINALS - 30° INDEX - SET @ 2 POS. - 1/8 DIA. SHAFT
ACTIVE POLES/ NO. OF SHORTING NON- FIG.
POLES POSITIONS SECTION SECTIONS
01
02-12
1
1 D2D0112S
* SHORTING
D2D0112N DE
02
02-06
2
1 D2D0206S D2D0206N DL
02
02-12
1
2 D2D0212S D2D0212N DE
03
02-05
3
1 D2D0305S D2D0305N DO
03
02-12
1
3 D2D0312S D2D0312N DE
04
02-06
2
2 D2D0406S D2D0406N DL
06
02-05
3
2 D2D0605S D2D0605N DO
06
02-06
2
3 D2D0606S D2D0606N DL
ACTIVE POLES/
POLES POSITIONS SECTION
01
02-11
1
02
02-05
2
02
02-11
1
03
02-03
3
03
02-11
1
04
02-05
2
06
02-05
2
06
02-03
3
NO. OF SHORTING NON-
SECTIONS
SHORTING
1 D2C0111S
1 D2C0205S
2 D2C0211S
1 D2C0303S
3 D2C0311S
2 D2C0405S
3 D2C0605S
2 D2C0603S
D2C0111N
D2C0205N
D2C0211N
D2C0303N
D2C0311N
D2C0405N
D2C0605N
D2C0603N
FIG.
*
DB
DG
DB
DN
DB
DG
DG
DN
DIMENSIONS
* FIGURES ARE SHOWN ON PAGES 55 AND 56.
STANDARD CONSTRUCTION
D2D
DIALLYL PHTHALATE INSULATION
D2C
CERAMIC INSULATION
2010 Yonkers Road
• ELECTRONIC PRODUCTS
Raleigh, NC 27604
20
UNIT OF ELECTRO SWITCH CORP.
Telephone: (888) ROTARYS or (919) 833-0707
Fax: (800) 909-9171 or (919) 833-8016