CZ12010T0050GTR Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Surface Mount Chip Terminations

ATC HIGH POWER RESISTIVE PRODUCTS
Surface Mount
Chip Terminations
Style CZ
General Specifications
• Nominal Impedence: 50 Ω
• Resistive Tolerance:
±2% standard
• Operating Temp Range:
-55 to +150˚C
• Temperature Coefficient:
±150 ppm/˚C
• Resistive Elements:
Tantalum, Thin Film Processed
• Substrate Material:
Aluminum Nitride
• Terminals: Silver over Nickel
• Lead-Free, RoHS Compliant
• Reliability: MIL-PRF-55342
• Tape and Reel Specifications:
See ATC #001-1067
CZ12010T0050G &
CZ12010T0050G02
CZ12525T0050G
ATC Part Number
CZ12010T0050G
CZ12010T0050G02
CZ12525T0050G
W
±.010
.100
.100
.245
L
±.010
.200
.200
.245
T
±.005
.040
.040
.040
LT
±.005
.040
.020
.030
WT
±.005
.090
.090
.125
LA
±.005
.115
.140
.170
Frequency
Range (GHz)
DC - 3.0
DC - 3.0
DC - 4.0
VSWR Power Max*
(Typ.) (Watts)
1.20:1
10W
1.20:1
10W
1.25:1
20W
* Test Condition: Chip soldered to a via patch on a 30-mil-thick Rogers RO4350 board; Land surfaces at 100° C; maximum rated power applied.
Specification: The resistance of the film shall change no more than 0.5% during and after a 1000-hr. Burn-in per Mil-PRF-55342.
Power Derating
100%
80
60
Rated Safe Operating Range
40
20
0
-50˚C -25˚C
0˚C +25˚C +50˚C 75˚C 100˚C 125˚C 150˚C
Heat Sink Temperature (°C)
ATC Part Number Code
CZ1 2010 T 0050 J TR
Case Style
Case Size
Termination
Packaging
TR - Tape & Reel
BK - Plastic Carrier
Tolerance
See table below.
Value
Code
Tol.
Resistive Tolerances
G (%)
±2
J (%)
±5
Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC document #001-992 Rev. B; 12/05). Copies of these
terms and conditions will be provided upon request. They may also be viewed on ATC's website at www.atceramics.com/productfinder/default.asp. Click on the link for Terms and Conditions of Sale.
ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third
parties which may result from its use. ATC reserves the right to revise the content or modify its product without prior notice.
© 2003 American Technical Ceramics Corp. All Rights Reserved.
Excerpt from ATC # 001-944; Rev. O, 12/10
AMERICAN TECHNICAL CERAMICS
ATC North America
ATC Europe
ATC Asia
[phone] • [e-mail] [phone] • [e-mail] [phone] • [e-mail]
www.atceramics.com