CTF100 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Coaxial cables used in cabled distribution networks designed according the European

TECHNICAL DATA SHEET
COAX CTF100
Code CTF100
version 1
date 2008-04-09
page 1/2
APPLICATION
Coaxial cables used in cabled distribution networks designed according the European
Standard EN 50117-2-1 and En 50117-2-4 operating at frequencies between 5 MHz and 3000
MHz.
CONSTRUCTION
1 2 3.1 3.2 4
1 Inner conductor
2 Dielectric
3.1 Foil
3.2 Braid
4 Sheath
Solid soft annealed copper
Gas injected LDPE
Copper-polyester foil
Annealed copper
PVC according the European Standard HD 624.
REQUIREMENTS AND TEST METHODS
Test methods in accordance with European standard EN 50117-1.
Mechanical characteristics
1. Inner conductor.
Diameter:
2. Dielectric:
Diameter:
Adhesion:
3. Outer conductor:
Diameter screen:
Coverage braid:
4. Sheath:
Diameter:
Tensile strength:
Elongation at break:
5. Cable:
Storage/operation temperature:
Minimum installation temperature:
Minimum static bend radius:
0.96 mm ± 0.02 mm
4.7 mm ± 0.15 mm
7.5 – 75 N at 25 mm
5.35 mm ± 0.15 mm
55 % ± 5 %
6.65 mm ± 0.2 mm
≥ 12.5 N/mm²
≥ 150 %
-40°C to +70°C
-5 °C
35 mm
 Belden Wire & Cable B.V.
All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner