CS1 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – Style CS1 and Style CW

ATC HIGH POWER RESISTIVE PRODUCTS
Surface Mount
Chip Resistors
Style CS1 and Style CW
General Specifications
• Resistance: 100 Ω standard,
(other Ω values available)
Top
View
Style CS
Style CW
Overcoat
• Resistive Tolerance: ±2% standard
• Operating Temp Range: -55 to +150˚C
Side _T
View
T
• Temperature Coefficient: <150 ppm/˚C
• Resistive Elements: Proprietary Thin Film
L
L
• Substrate Material: Aluminum Nitride
LT
• Terminals: Silver over Nickel
• Lead-Free, RoHS Compliant
Bottom
View
WT
W
WT
W
• Reliability: MIL-PRF-55342
• Tape and Reel Specifications:
See Page 39 of the full Resistive Products Catalog
LA
LT
ATC
Part Number*
CS12010TxxxxG
CS12525TxxxxG
CS13725TxxxxG
CS13737TxxxxG
W
±.010
.100
.245
.250
.370
L
±.010
.200
.245
.375
.370
T
±.005
.040
.040
.040
.040
WT LT
±.005 ±.005
.090 .030
.120 .040
.120 .050
.360 .050
LA
±.005
.095
.110
.195
.195
Capacitance
(pF)
.95 pF
1.85 pF
3.0 pF
3.5 pF
Power Max**
(Watts)
10W
20W
30W
40W
ATC
Part Number*
W
±.010
L
±.010
T
±.005
WT
±.005
LT
±.005
Power Max**
(Watts)
CW12010TxxxxG
.100
.200
.040
.090
.030
4W
CW12525TxxxxG
.245
.245
.040
.120
.040
6W
CW13725TxxxxG
.250
.375
.040
.120
.050
8W
CW13737TxxxxG
.370
.370
.040
.360
.050
10W
* xxxx denotes Ohm value.
** Test Condition: Chip soldered to a via patch on a 30-mil-thick Rogers RO4350 board;
Land surfaces at 100° C; maximum rated power applied.
Specification: The resistance of the film shall change no more than 0.5% during and after a 1000-hr. Burn-in per Mil-PRF-55342.
Power Derating
ATC Part Number Code
100%
CS1 2010 T xxxx J TR
80
60
Rated Safe Operating Range
40
20
0
-50˚C -25˚C
0˚C +25˚C +50˚C 75˚C 100˚C 125˚C 150˚C
Heat Sink Temperature (C)
Case Style
Case Size
Termination
Code
Tol.
Resistive Tolerances
G (%)
±2
Packaging
TR - Tape & Reel
BK - Plastic Carrier
Tolerance
See table below.
Value
J (%)
±5
Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC document #001-992 Rev. B 12/05).
Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC's website at www.atceramics.com/productfinder/default.asp. Click on the link
for Terms and Conditions of Sale.
ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third
parties which may result from its use. ATC reserves the right to revise the content or modify its product without prior notice.
© 2012 American Technical Ceramics Corp. All Rights Reserved.
Excerpt from ATC # 001-944; Rev. R, 11/13
AMERICAN TECHNICAL CERAMICS
ATC North America
[e-mail]
ATC Europe
[e-mail]
ATC Asia
[e-mail]
www.atceramics.com