CR1 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – ATC HIGH POWER RESISTIVE PRODUCTS

ATC HIGH POWER RESISTIVE PRODUCTS
Chip Resistors
Style CR1
General Specifications
• Resistance: 100 Ω standard,
(other Ω values available)
• Resistive Tolerance: ±5% standard
(2% Available)
A
Overcoat
Resistive
Area
Top
View
• Operating Temp Range: -55 to +150˚C
• Temperature Coefficient: <150 ppm/˚C
• Resistive Elements: Proprietary Thin Film
• Substrate Material: Aluminum Nitride
• Terminals: Silver
Side
• Lead-Free, RoHS Compliant
View
• Reliability: MIL-PRF-55342
• Non-Magnetic
STYLE R
• Tape and Reel Specifications:
See Page 39 of the full Resistive Products Catalog
ATC
Part Number*
W
L
T
AB
±.010 ±.010 ±.005 ±.005 (Typ.)
Capacitance
(pF)
Power Max**
(Watts)
CR11005TxxxxJ
.050 .100 .025 .045 .020
.75
5W
CR11206TxxxxJ
.060 .120 .025 .055 .020
.90
15W
CR12010TxxxxJ
.100 .200 .040 .090 .020
1.0
30W
CR12525TxxxxJ
.245 .245 .040 .130 .020
2.0
60W
CR12525TxxxxJ01 .245 .245 .040 .130 .020
2.0
100W
CR13725TxxxxJ
.250 .375 .040 .198 .025
4.15
150W
CR13737TxxxxJ
.370 .370 .040 .330 .025
6.0
250W
* xxxx denotes Ohm value.
** Test Condition: Chip soldered to a large copper carrier whose surface is at 100° C; maximum rated power applied.
Specification: The resistance of the film shall change no more than 0.5% during and after a 1000-hr. Burn-in per Mil-PRF-55342.
Power Derating
ATC Part Number Code
100%
80
60
Rated Safe Operating Range
40
20
0
-50˚C -25˚C
0˚C +25˚C +50˚C 75˚C 100˚C 125˚C 150˚C
Heat Sink Temperature (C)
Case Style
Case Size
Termination
Value
100 ⍀ = 0100
50 ⍀ = 0050
Code
Tol.
CR1 2010 T xxxx J TR
Packaging
TR - Tape & Reel
(Standard)
BK - Plastic Carrier
TU* (Optional)
Tolerance
See table below.
*Chip is reversed upside-down
in tape cavity
Resistive Tolerances
G (%)
J (%)
±2
±5
Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC document #001-992 Rev. B 12/05).
Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC's website at www.atceramics.com/productfinder/default.asp. Click on the link
for Terms and Conditions of Sale.
ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third
parties which may result from its use. ATC reserves the right to revise the content or modify its product without prior notice.
© 2012 American Technical Ceramics Corp. All Rights Reserved.
Excerpt from ATC # 001-944; Rev. R, 11/13
AMERICAN TECHNICAL CERAMICS
ATC North America
[e-mail]
ATC Europe
[e-mail]
ATC Asia
[e-mail]
www.atceramics.com