CPU-1474 Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – PC/104-Plus compliant Intel® Celeron® M 1GHz, 512KB L2 cache, 400MHz FSB

CPU-1474
Celeron® M Fanless SBC with Gigabit & Fast Ethernet
Features
General Features:
Architecture:
• PC/104-Plus compliant
Processor Availability:
• Intel® Celeron® M 1GHz, 512KB L2 cache, 400MHz
FSB
Chipset:
• Intel® i855GME
System Memory:
• 512MB DDR, 266MHz (PC2100), soldered onboard
Supported Operating Systems:
• WinCE®, WinXPE® and Linux®
BIOS Flash:
• 1MB Flash EPROM
Interfaces:
• IDE ATA 100 Controller
• Serial ports:
- 1x RS-232
- 1x RS-232/422/485
• 4x USB 2.0 ports
• Gigabit Ethernet (Intel® 82541 chipset)
• 10/100 Mbps Ethernet (Intel® 82562 chipset)
• Graphic controller with analog VGA and Flat Panel
LVDS interface
• AC97 audio interface
• Keyboard and Mouse
Bus:
• PC/104-Plus (PCI)
• PC/104 (ISA)
Watchdog:
• 2-255 seconds / minutes
Power Supply:
• Single +5V DC
RoHS:
• Fully RoHS (2002/95/CE) Compliant
The CPU-1474 is an embedded RoHS compliant board based on two modules:
a mezzanine CPU module combined with a PC/104-Plus form factor carrier.
The mezzanine CPU module features the Intel® Celeron® M 1GHz (having
512KB L2 cache and 400MHz FSB) processor and its Intel® i855GME chipset.
The system comes with 512MB DDR, 266MHz (PC2100), soldered onboard.
No active cooling is required to operate within the standard and extended
temperature ranges. The carrier implements all the connections to the external
world, including 4 USB 2.0 ports, 1 Gigabit Ethernet interface
(1000/100/10Mbps), 1 Fast Ethernet interface (10/100Mbps), 2 Serial ports,
Analog VGA and Flat Panel LVDS outputs, 1 AC97 interface, Keyboard and
Mouse connectors and an IDE controller that supports IDE Flash device (Disk-
On-Module, Compact Flash and Flash Disk). The carrier also performs the
connections for the ISA and PCI bus enabling the CPU-1474 to stack on top of
a PC/104-Plus system. The carrier provides support for Watchdog management
and Real Time Clock (external backup battery) and can be customized to match
specific customer needs.
The BIOS for the module is embedded and is located in a 1MB Flash EPROM,
it is fully re-programmable onboard. The set-up parameters are saved in Flash
to allow the module to operate without a battery.