CPU-111-10 Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – OpenVPX Compatible Quad Core Intel Xeon Integrated 12-port 10Gb Ethernet Switch

CPU-111-10
6U OpenVPX
Quad Core with integrated 10Gb Switch
• OpenVPX Compatible
• Quad Core Intel Xeon
• Integrated 12-port 10Gb Ethernet Switch
• MIL-STD-810F version
• Convection and Conduction cooled
• Open VPX Profile: MOD6-PAY-4F2T-12.2.2.4
FEATURES
Open VPX compatible – The CPU-111-10 is OpenVPX
compatible, with a MOD6-PAY-4F2T-12.2.2.4 profile. It is a
Payload Module with 4 fat pipes (10 GBase-BX4) and two thin
pipes (1000Base-T).
High Perfomance – With an Intel Quad-core Xeon CPU and up
to 4GB of DDR2 RAM, the CPU-111-10 delivers very efficient
computational capacity.
10Gb Ethernet Switch – The CPU-111-10 has an integrated
12-port 10Gb Ethernet switch providing full-mesh that allows
integrated up to 8 CPU-111-10 boards in a single chassis
MIL-STD Versions – The CPU-111-10 is available in
configurations MIL-STD-F compliant, and supports wedge locks
for high shock and vibration immunity.
Convection and Conduction Cooled – The CPU-111-10
is available in convection and conduction cooled versions.
Conformal coating is available for both versions.
• Defense
• Homeland Security
• Aerospace
• Industrial
• Transportation
The CPU-111-10 is a high performance Single Board Computer (SBC) based
on the 6U VPX (VITA 46) form factor and compatible with the OpenVPX stadard.
Offered in both convection cooled and ruggedized conduction cooled variants,
the CPU-111-10 meets the needs of numerous applications, in markets such as
Defense, Industry and Transportation.
At the heart of the CPU-111-10 is one quad-core Intel L5408 Xeon Processor,
with up to 4 GBytes of DDR2 SDRAM
The CPU-111-10 provides unparalleled data processing capabilities. It supports
two fully capable PMC/XMC sites with extensive User I/O. An on-board
10 Gigabit Ethernet Switch provides full-mesh backplane datalayer
interconnectivity, allowing up to eight CPU-111-10 SBC’s to be integrated into a
single chassis without the use of an additional switch board.
The dual 10 Gigabit Ethernet controller, connected to the internal 10 Gigabit
Ethernet Switch supports the IEEE 1588 Precision Time Protocol standard
allowing all node boards to be synchronized in the sub-microsecond range;
additionally, a dual 1Gigabit Ethernet controller provides 1000Base-T or
1000BASE-KX connectivity to the backplane via the VPX P4 connector.
For convection cooled applications, the CPU-111-10 provides a front panel
SFP+ port supporting CX4 copper and Fiber applications for chassis-to-chassis
and rack-to-rack communications.