CPCI-9116 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – 3U/6U Eurocard form factor, CompactPCI compliant

General-Purpose DAQ
cPCI-9116 Series
64-CH 16-Bit 250 kS/s Multi-Function DAQ Cards
CompactPCI
Introduction
ADLINK’s cPCI-9116 series are high-density and high-resolution multi-function DAQ cards for
PXI/CompactPCI form factors. The devices can sample up to 64 AI channels with different gain settings and
scan sequences, making them ideal for dealing with high-density analog signals with various input ranges
and sampling speeds. The cPCI-9116 devices feature flexible configurations on analog inputs. They provide
analog inputs with 4 programmable input ranges for both bipolar and unipolar inputs. The A/D on the cPCI-9116
devices features a sampling rate of up to 250 kS/s with resolution at 16 bits. These devices also offer
differential mode for 32 AI channels in order to achieve maximum noise elimination.
The cPCI-9116 series also feature 1-CH 16-bit general purpose timer/counter, 8-CH TTL digital inputs, and
8-CH TTL digital outputs. The cPCI-9116R allows I/O connectivity to be routed through the backplane via J2/P2
allowing a rear I/O transition module to be inserted, which is capable of efficient trouble-shooting and
maintenance. ADLINK cPCI-9116 devices deliver cost-effective and reliable data acquisition capabilities, and
are ideal for a broad variety of applications.
Features
■ 3U/6U Eurocard form factor, CompactPCI compliant
(PICMG 2.0 R2.1)
■ 16-bit A/D resolution, up to 250 kS/s sampling rate
■ Up to 250 kS/s sampling rate
■ 64-CH single-ended or 32-CH differential inputs
■ Onboard 1 k-sample A/D FIFO
■ Bipolar or unipolar analog input ranges
■ Programmable gains of x1, x2, x4, x8
■ 512-configuration channel-gain queue
■ Bus-mastering DMA for analog inputs
■ 8-CH TTL digital inputs and 8-CH TTL digital outputs
■ 1-CH 16-bit general purpose timer/counter
■ Rear I/O available on cPCI-9116R
■ Operating Systems
• Windows 7/Vista/XP/2000/2003 Server
• Linux
• Windows CE (call for availability)
■ Recommended Software
• AD-Logger
• VB.NET/VC.NET/VB/VC++/BCB/Delphi
• DAQBench
■ Driver Support
• DAQPilot for Windows
• DAQPilot for LabVIEW™
• DAQ-MTLB for MATLAB^®
• PCIS-DASK for Windows
• PCIS-DASK/X for Linux
Specifications
Analog Input
■ Number of channels: 64 single-ended or
32 differential (software selectable per channel)
■ Resolution: 16 bits
■ Maximum sampling rate: 250 kS/s
■ Input signal ranges (software programmable)
Gain
Input Range
Bipolar
Unipolar
1
±5 V
0 to 10 V
2
±2.5 V
0 to 5 V
4
±1.25 V
0 to 2.5 V
8
±0.625 V
0 to 1.25 V
■ Accuracy
Gain
1
2, 4
8
2-25 _{www.adlinktech.com}
Accuracy
0.01% of FSR ± 1 LSB
0.02% of FSR ± 1 LSB
0.04% of FSR ± 1 LSB
■ Input coupling: DC
■ Overvoltage protection: Continuous ±35 V
■ Input impedance: 1 GΩ
■ Trigger modes: Software, pre-trigger, post-trigger,
middle trigger, delay trigger, and repeated trigger
■ Channel-gain queue size: 512 configurations
■ FIFO buffer size: 1 k samples
■ Data transfers:
polling, interrupt, bus-mastering DMA
Digital I/O
■ Number of channels: 8 inputs and 8 outputs
■ Compatibility: 5 V/TTL
■ Data transfers: programmed I/O
General-Purpose timer/counter
■ Number of channels: 1
■ Resolution: 16 bits
■ Compatibility: 5 V/TTL
■ Base clock available:
24 MHz, external clock up to 24 MHz
General Specifications
■ I/O connector: 100-pin SCSI-II female
■ Operating temperature: 0˚C to 55˚C
■ Storage temperature: -20˚C to 80˚C
■ Relative humidity: 5% to 95%, non-condensing
■ Power requirements
+5 V
+12 V
560 mA typical
100 mA typical
■ Dimensions (not including connectors)
• 160 mm x 100 mm (3U)
Terminal Boards & Cables
■ DIN-100S-01
Terminal Board with One 100-pin SCSI-II Connector
and DIN-Rail Mounting (cables are not included.)
■ ACL-102100-1
100-pin SCSI-II cable (mating with AMP-787082-9), 1 M
* For more information on mating cables, please refer to
P2-59/60.
Ordering Information
■ cPCI-9116
64-CH 16-Bit 250 kS/s Multi-Function DAQ Card
■ cPCI-9116R
64-CH 16-Bit 250 kS/s Multi-Function
DAQ Card with Rear I/O
Pin Assignment
U_CMMD 1
AI0 (AIH0) 2
AI1 (AIH1) 3
AI2 (AIH2) 4
AI3 (AIH3) 5
AI4 (AIH4) 6
AI5 (AIH5) 7
AI6 (AIH6) 8
AI7 (AIH7) 9
AI8 (AIH8) 10
AI9 (AIH9) 11
AI10 (AIH10) 12
AI11 (AIH11) 13
AI12 (AIH12) 14
AI13 (AIH13) 15
AI14 (AIH14) 16
AI15 (AIH15) 17
AI16 (AIH16) 18
AI17 (AIH17) 19
AI18 (AIH18) 20
AI19 (AIH19) 21
AI20 (AIH20) 22
AI21 (AIH21) 23
AI22 (AIH22) 24
AI23 (AIH23) 25
AI24 (AIH24) 26
AI25 (AIH25) 27
AI26 (AIH26) 28
AI27 (AIH27) 29
AI28 (AIH28) 30
AI29 (AIH29) 31
AI30 (AIH30) 32
AI31 (AIH31) 33
AGND 34
+15Vout 35
N/C 36
DI0 37
DI1 38
DI2 39
DI3 40
DI4 41
DI5 42
DI6 43
DI7 44
ExtTimeBase 45
ExtTrg 46
SSH_OUT 47
GP_TC_GATE 48
+5Vout 49
DGND 50
51 AGND
52 (AIL0) AI32
53 (AIL1) AI33
54 (AIL2) AI34
55 (AIL3) AI35
56 (AIL4) AI36
57 (AIL5) AI37
58 (AIL6) AI38
59 (AIL7) AI39
60 (AIL8) AI40
61 (AIL9) AI41
62 (AIL10) AI42
63 (AIL11) AI43
64 (AIL12) AI44
65 (AIL13) AI45
66 (AIL14) AI46
67 (AIL15) AI47
68 (AIL16) AI48
69 (AIL17) AI49
70 (AIL18) AI50
71 (AIL19) AI51
72 (AIL20) AI52
73 (AIL21) AI53
74 (AIL22) AI54
75 (AIL23) AI55
76 (AIL24) AI56
77 (AIL25) AI57
78 (AIL26) AI58
79 (AIL27) AI59
80 (AIL28) AI60
81 (AIL29) AI61
82 (AIL30) AI62
83 (AIL31) AI63
84 AGND
85 -15Vout
86 N/C
87 DO0
88 DO1
89 DO2
90 DO3
91 DO4
92 DO5
93 DO6
94 DO7
95 N/C
96 GP_TC_CLK
97 GP_TC_GATE
98 GP_TC_UPDN
99 +5Vout
100 DGND