CONSMA015 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – SMA FEMALE BULKHEAD MOUNT CABLE END CRIMP WITH O-RING FOR RG174 CABLE

Description
Body
Socket
Insulation
Crimp Ring
O Ring
Washer
Nut
Heat Shrink
Material
Brass
BE CU
Teflon
Brass
SI Rubber
Brass
Brass
Polyolefin
Finish
Nickel
Gold
Teflon
Nickel
Rubber
Nickel
Nickel
Black
SIDE VIEW
RECOMMENDED CABLE
STRIPPING DIMENSIONS
0.098
(2.50)
0.134
(3.40)
0.177
(4.50)
H0.433 _1/4-36UNS-2A
(11.00)
THREADS
FLAT 0.228
1/4-36UNS-2A
(5.80)
THREADS
Ø0.102
(2.60)
REVISIONS
REV
DESCRIPTION
B Add assembly instructions and heat shrink
RG-174 Cable
DATE
APPV
1/8/10
CJ
RECOMMENDED
MOUNTING HOLE
Ø0.256
(6.50)
SOCKET
PIN CHUCK
0.2x2x2 GROOVE
Ø0.020
(0.50)
0.587
(14.90)
Ø0.024 Ø0.049
(0.60) (1.24)
0.236
(6.00)
CRIMP RING
0.374
(9.50)
Ø0.154
(3.90)
0.228 0.083
(5.80) (2.10)
0.472
(12.00)
0.980
(24.90)
HEAT SHRINK TUBING
Ø0.197
(5.0)
O-RING
WASHER
NUT
Ø0.358
Ø0.236 ^(9.10)
(6.00)
Ø0.402
(10.20)
H0.315
(8.00)
1/4-36UNS-2B
THREADS
0.787
(20.00)
NOTES: (UNLESS OTHERWISE SPECIFIED)
1. ALL DIMENSIONS ARE IN INCHES [mm].
2. DIMENSIONS APPLY AFTER FINISHING.
3. MANUFACTURE TO BE COMPLIANT WITH EU RoHS DIRECTIVE.
4. SAFETY BREAK ALL SHARP CORNERS AND EDGES .02 MAXIMUM.
0.055
(1.40)
0.020
(0.50)
0.065
(1.65)
: THIS DRAWING CONTAINS PROPRIETARY INFORMATION
THAT IS THE SOLE PROPERTY OF CONNECTOR CITY, AND SHALL BE
TREATED AS SUCH. NO DISCLOSURE OR REPRODUCTION OF THIS
DOCUMENT IS PERMITTED, IN WHOLE OR IN PART, WITHOUT THE
EXPRESS WRITTEN PERMISSION OF CONNECTOR CITY OR ITS
DESIGNATED AGENTS.
159 ORT LANE
MERLIN, OR 97532
TITLE:
SMA FEMALE BULKHEAD MOUNT CABLE
CONSMA015 ASSEMBLY INSTRUCTIONS
MATERIAL:
1. Solder the pin to the center conductor or crimp with 0.028” hex crimp tool.
2. Insert the pin, center conductor, and insulation into the body.
3. Wrap the braid around the tail of the body and crimp the ring with a
FINISH:
0.128" hex crimp tool (or one labeled for use with RG-174 cable).
TOLERANCES:
PROJECTION:
.020 [0.50]-.200 [5.00]= .008 [0.20]
END CRIMP WITH O-RING FOR RG174 CABLE
.200 [5.00]-1.200 [30.00]= .016 [0.40]
1.20 [30.0]-4.75 [120.0]= .024 [0.60]
4.75 [120.0]-12.40 [315.0]= .040 [1.0] ^{ANGLES: 1}
SIZE
DWG. NO.
DRAWN: CJ
DT: 1/8/10
CONSMA015
REV
B
4. Slide heat shrink tubing over crimp ring and then heat.
ENGR:
DT:
SCALE: 2:1
DO NOT SCALE DRAWING
SHEET 1 OF 1
LDCFDCC_A