CONSMA007-R178 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – SMA MALE CABLE END CRIMP FOR RG178 CABLE

1
2
3
4
Description
Material
Finish
Body
Brass
Nickel
Pin
BE CU
Gold
Insulation
Teflon
Teflon
Washer
PH Bronze Gold
D ^Gasket
SI Rubber Rubber
D
Crimp Ring
Brass
Nickel
Spacer
Teflon
Teflon
Support
Brass
Gold
C
H0.311
(7.90)
1/4-36UNF-2B
THREADS
B
SIDE VIEW
0.577
(14.65)
0.197
(5.00)
Ø0.102
(2.60)
0.102
(2.60)
PIN
Ø0.024
(0.60)
Ø0.035
(0.90)
0.335
(8.50)
Ø0.049
(1.25)
SPACER
SUPPORT
C
B
RECOMMENDED CABLE STRIPPING DIMENSIONS
CONSMA007-R178 ASSEMBLY INSTRUCTIONS
0.118
(3.00)
0.177
(4.50)
RG-178 Cable
1. Strip the cable to the recommended dimensions.
2. Solder the support onto the braid.
3. Place the spacer onto the center conductor.
4. Solder or crimp the pin onto the center conductor.
5. Insert the pin, center conductor, spacer, and support into the body
until the top of the pin is even with the body.
6. Crimp the tail of the body onto the support with a hex crimp tool.
A
A
0.254
(6.50)
Title
Part No.
SMA MALE CABLE END
CRIMP FOR RG178 CABLE
CONSMA007-R178
Revision: _1.0
CONNECTOR CITY
159 ORT LANE
MERLIN, OR 97532
PH (541)-471-6256
FAX [phone]
Dimensions:
INCHES (mm)
Date: 6/2/2006
Sheet 1 of 1
1
2
3
4