CONSMA005-R58 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – SMA FEMALE BULKHEAD MOUNT CABLE END CRIMP FOR RG58 CABLE

Description
Nut
Washer
Main Body
Pin Insulator
D ^Socket
Spacer
Shield Sleeve
Retaining Nut
Crimp Ring
1
Material
Brass
Brass
Brass
Teflon
BE CU
Teflon
Brass
Brass
Brass
Finish
Nickel
Nickel
Nickel
Teflon
Gold
Teflon
Nickel
Nickel
Nickel
1/4-36UNS-2A
THREADS
SIDE VIEW
C
2
3
RECOMMENDED CABLE STRIPPING DIMENSIONS
0.134 0.268
(3.40) (6.80)
0.276
(7.00)
RG-58 Cable
∅0.177
(4.50)
WASHER
SOCKET
0.354
(9.00)
∅0.049
(1.24)
NUT
4
RECOMMENDED
MOUNTING HOLE
∅0.254
(6.50)
D
0.234
(6.00)
CRIMP RING
Ø0.256
(6.50)
C
0.446
(11.40)
0.636
(16.30)
0.276
(7.00)
Ø0.402
(10.20)
H8
1/4-36UNS-2B
THREADS
0.500
(12.70)
0.996
(25.30)
0.020
0.065
B
(0.50)
(1.65)
B
WASHER
CONREVSMA005-R58 ASSEMBLY INSTRUCTIONS
PIN INSULATOR
SPACER
RETAINING NUT
CRIMP RING
NUT
MAIN BODY
SOCKET
SHIELD SLEEVE
STRIPPED CABLE
SHRINK WRAP
1. Insert the center conductor through the retaining nut, shield sleeve, and spacer.
A 2. Solder the pin to the center conductor.
A
3. Insert the pin into the pin insulator, then screw the main body onto the retaining nut.
4. Wrap the braid around the tail of the body and crimp the ring with a
hex crimp tool.
5. Use the shrink wrap to cover the crimp ring.
6. Use the nut and washer to secure the connector to a case.
Title _{SMA FEMALE BULKHEAD MOUNT}
CABLE END CRIMP FOR RG58 CABLE
Part No. _{CONSMA005-R58}
Revision: _1.0
CONNECTOR CITY
159 ORT LANE
MERLIN, OR 97532
PH (541)-471-6256
FAX [phone]
Dimensions:
INCHES (mm)
Date: 5/29/2007
Sheet 1 of 1
1
2
3
4