CONREVSMA011-R178 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – RP-SMA FEMALE CABLE END CRIMP FOR RG178 CABLE

Description
Body
Pin
Insulation
Support
Spacer
Heat Shrink
Material
Brass
BE CU
Teflon
Brass
Teflon
Polyolefin
Finish
Nickel
Gold
Teflon
Gold
Teflon
Black
1/4-36UNS-2B
THREADS
SIDE VIEW
Ø0.209
(5.30)
Ø0.102 0.248
(2.60) (6.30)
0.252
(6.40)
0.122
(3.10)
0.571
(14.50)
0.197
(5.00)
REVISIONS
REV
DESCRIPTION
A New frame; add heat shrink;
DATE
4/26/10
APPV
CJ
PIN
0.339
(8.60)
Ø0.049
(1.25)
SPACER
SUPPORT
HEAT SHRINK
0.787
(20.00)
Ø0.118
(3.00)
CONREVSMA011-R178 ASSEMBLY INSTRUCTIONS
1. Strip the cable to the recommended dimensions.
2. Solder the support onto the braid.
3. Place the spacer onto the center conductor.
4. Solder or crimp the pin onto the center conductor.
5. Insert the pin, center conductor, spacer, and support into the body
until the top of the pin is even to end of the body.
6. Crimp the tail of the body onto the support with a 0.093” hex crimp tool.
NOTES: (UNLESS OTHERWISE SPECIFIED)
1. ALL DIMENSIONS ARE IN INCHES [mm].
2. DIMENSIONS APPLY AFTER FINISHING.
3. MANUFACTURE TO BE COMPLIANT WITH EU RoHS DIRECTIVE.
4. SAFETY BREAK ALL SHARP CORNERS AND EDGES .02 MAXIMUM.
RECOMMENDED CABLE STRIPPING DIMENSIONS
0.098 ^0.033 0.177
(2.50) ^(0.85) (4.50)
RG-178 Cable
: THIS DRAWING CONTAINS PROPRIETARY INFORMATION
THAT IS THE SOLE PROPERTY OF CONNECTOR CITY, AND SHALL BE
TREATED AS SUCH. NO DISCLOSURE OR REPRODUCTION OF THIS
159 ORT LANE
MERLIN, OR 97532
DOCUMENT IS PERMITTED, IN WHOLE OR IN PART, WITHOUT THE
EXPRESS WRITTEN PERMISSION OF CONNECTOR CITY OR ITS
DESIGNATED AGENTS.
TITLE:
RP-SMA FEMALE CABLE END
MATERIAL:
TOLERANCES:
PROJECTION:
.020 [0.50]-.200 [5.00]= .008 [0.20]
CRIMP FOR RG178 CABLE
FINISH:
.200 [5.00]-1.200 [30.00]= .016 [0.40]
1.20 [30.0]-4.75 [120.0]= .024 [0.60]
4.75 [120.0]-12.40 [315.0]= .040 [1.0] ^ANGLES:
1
SIZE
DWG. NO.
CONREVSMA011-R178
REV
DRAWN: CJ
DT: 4/26/10
ENGR:
DT:
SCALE: 2:1
DO NOT SCALE DRAWING
SHEET 1 OF 1
LDCFDCC_A