CONREVSMA007-R178 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – RP-SMA MALE CABLE END CRIMP FOR RG178 CABLE

1
2
Description
Material
Finish
Body
Brass
Nickel
Socket
BE CU
Gold
Insulation
Teflon
Teflon
Washer
D ^Gasket
Crimp Ring
PH Bronze
SI Rubber
Brass
Gold
Rubber
Nickel
Spacer
Teflon
Teflon
Support
Brass
Gold
SIDE VIEW
H0.311
C
(7.90)
1/4-36UNF-2B
THREADS
B
Ø0.102
(2.60)
0.577
(14.65)
0.197
(5.00)
3
4
D
SOCKET
PIN CHUCK
0.2x2x2 GROOVE
0.240
(6.10)
Ø0.049
(1.25)
SPACER
SUPPORT
C
B
RECOMMENDED CABLE STRIPPING DIMENSIONS
CONREVSMA007-R178 ASSEMBLY INSTRUCTIONS
0.118
(3.00)
0.177
(4.50)
RG-178 Cable
1. Strip the cable to the recommended dimensions.
2. Solder the support onto the braid.
3. Place the spacer onto the center conductor.
4. Solder or crimp the socket onto the center conductor.
5. Insert the socket, center conductor, spacer, and support into the body
until the top of the socket is even with the white insulation in the body.
A
0.254
6. Crimp the tail of the body onto the support with a hex crimp tool.
A
(6.50)
Title _{RP-SMA MALE CABLE END}
CRIMP FOR RG178 CABLE
Part No. _{CONREVSMA007-R178} Revision: _1.0
CONNECTOR CITY
159 ORT LANE
MERLIN, OR 97532
PH (541)-471-6256
FAX [phone]
Dimensions:
INCHES (mm)
Date: 5/31/2006
Sheet 1 of 1
1
2
3
4