CONREVMCX007-R178 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – RP-MCX MALE CABLE END CRIMP FOR RG178 CABLE

Description
Body
Socket
Insulation
Crimp Ring
D Snaps
Spacer
Support
1
Material
Brass
BE CU
Teflon
Brass
BE CU
Teflon
Brass
Finish
Gold
Gold
Teflon
Gold
Gold
Teflon
Gold
SIDE VIEW
BOYD CHUCK
0.3x3.9x5 GROOVE
C
Ø0.148
(3.75)
2
Ø0.102
(2.60)
Ø0.197
(5.00)
0.165
(4.20)
0.126
(3.20)
0.488
(12.40)
0.197
(5.00)
B
3
4
D
SOCKET
PIN CHUCK
0.2x2x2 GROOVE
SPACER
SUPPORT
C
0.244
(6.20)
Ø0.037
(0.95)
B
RECOMMENDED CABLE STRIPPING DIMENSIONS
0.118
(3.00)
0.071
(1.80)
0.157
(4.00)
RG-178 Cable
A
CONREVMCX007-R178 ASSEMBLY INSTRUCTIONS
1. Strip the cable to the recommended dimensions.
2. Solder the support onto the braid.
3. Place the spacer onto the center conductor.
4. Solder or crimp the socket onto the center conductor.
5. Insert the socket, center conductor, spacer, and support into the body
until the socket snaps in.
6. Crimp the tail of the body onto the support with a hex crimp tool.
A
Title _{RP-MCX MALE CABLE END CRIMP}
FOR RG178 CABLE
Part No. _{CONREVMCX007-R178} Revision: _1.0
Dimensions:
INCHES (mm)
Date: 1/19/2007
CONNECTOR CITY
159 ORT LANE
MERLIN, OR 97532
PH (541)-471-6256
FAX [phone]
Sheet 1 of 1
1
2
3
4