CONMCX007-R178 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – MCX MALE CABLE END CRIMP FOR RG178 CABLE

1
2
3
4
Description
Material
Finish
Body
Brass
Gold
Pin
Brass
Gold
Insulation
Teflon
Teflon
Snaps
BE CU
Gold
D Spacer
Teflon
Teflon
D
Support
Brass
Gold
C
Ø0.148
(3.75)
SIDE VIEW
BOYD CHUCK
0.3x3.9x5 GROOVE
0.165
(4.20)
0.126
(3.20)
0.488
(12.40)
0.197
(5.00)
B
Ø0.106
(2.70)
Ø0.197
(5.00)
Ø0.019
(0.48)
PIN
Ø0.020
(0.5)
0.232
(5.90)
Ø0.037
(0.95)
SPACER
SUPPORT
C
B
RECOMMENDED CABLE STRIPPING DIMENSIONS
0.110
(2.80)
0.020
(0.50)
0.236
(6.00)
RG-178 Cable
A
CONMCX007-R178 ASSEMBLY INSTRUCTIONS
1. Strip the cable to the recommended dimensions.
2. Solder the support onto the braid.
3. Place the spacer onto the center conductor.
4. Solder or crimp the pin onto the center conductor.
5. Insert the pin, center conductor, spacer, and support into the body
until the pin snaps in.
6. Crimp the tail of the body onto the support with a hex crimp tool.
A
Title _{MCX MALE CABLE END CRIMP}
FOR RG178 CABLE
Part No. _{CONMCX007-R178} Revision: _1.0
Dimensions:
INCHES (mm)
Date: 6/8/2006
CONNECTOR CITY
159 ORT LANE
MERLIN, OR 97532
PH (541)-471-6256
FAX [phone]
Sheet 1 of 1
1
2
3
4