CLI305 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – IRED - Phototransistor Photointerrupter

CLI305
IRED - Phototransistor
Photointerrupter
® _{Clairex}
Technologies, Inc.
September, 2001
1.322 (33.58)
1.302 (33.07)
0.510 (12.96)
0.442 (11.2)
0.490 (12.45)
0.432 (11.0)
0.380 (9.65)
0.370 (9.40)
0.260 (6.60)
0.240 (6.10)
0.188 (4.78) nom.
0.510 (12.9)
0.490 (12.4)
RED
1.01 (25.7)
0.99 (25.1)
BLUE (3)
GREEN (5)
0.128 (3.25) dia.
LEADS ARE #22 AWG, UL1429, 12.0 (304.8) MIN LONG.
Case 36
ALL DIMENSIONS ARE IN INCHES (MILLIMETERS)
Epoxy potting contour is not controlled.
BLACK
YELLOW (4)
features
• rugged plastic package
• hermetically sealed discretes
• narrow beam alignment
description
The CLI305 consists of an IRED
and a phototransistor mounted in a
black plastic housing. It features 12
inch leads and two holes for bracket
mounting in any position. Output
is an emitter follower transistor
providing high gain, fast switching
speed and TTL interfacing. There is
a 0.005” wide aperture in front of
the phototransistor. For assistance,
call Clairex.
absolute maximum ratings (T_A = 25°C unless otherwise stated)
storage and operating temperature……….………………………….-55°C to +100°C
LED
continuous forward DC current…………………………………………………….60mA
reverse DC voltage……………………………………………………………………...3V
power dissipation⁽¹⁾………………………………………………………………..100mW
OUTPUT TRANSISTOR
collector-emitter voltage………………………………………………………………30V
maximum continuous collector current⁽²⁾………………………………………..100mA
power dissipation⁽³⁾………………………………………………………………..200mW
notes:
1. Derate linearly 1.07mW/°C from 25°C free air temperature to T_A = +100°C.
2. 200mA when pulsed at 300µs, 2% duty cycle.
3. Derate linearly 2.13mW/°C from 25°C free air temperature to T_A = +100°C.
electrical characteristics (T_A = 25°C unless otherwise noted)
symbol parameter
min
Input IRED
V_F
Forward voltage
-
I_R
Reverse current
-
Output Transistor (leads 4 and 5)
I_D
Collector-emitter dark current
-
Coupled
I_L
Sensor current (lead 4)
20
V_O
Voltage between leads 4 and 5⁽⁴⁾
-
V_OFF Voltage between leads 4 and 5⁽⁴⁾
4.7
t_r
Output rise time⁽⁴⁾
-
t_f
Output fall time⁽⁴⁾
-
note: 4. 2.2kΩ resistor between leads 3 and 5.
typ max units test conditions
-
1.5
V I_F = 16mA
-
10
µA VR = 3V
-
100 nA V_CE = 10V, E_e = 0
-
-
mA I_F = 10mA, V_CE = 5V
-
0.50
V I_F = 20mA, V_CE = 5V
-
-
V E_e = 0
5
-
µsec IC = 2.0mA, VCE = 10V
50
-
µsec IC = 2.0mA, VCE = 10V
Clairex reserves the right to make changes at any time to improve design and to provide the best possible product.
Revised 10/01/04
Clairex Technologies, Inc.
Phone: [phone]
1301 East Plano Parkway
Fax: [phone]
Plano, Texas 75074-8524
www.clairex.com