CLE230 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – High Power Aluminum Gallium Arsenide IREDs

CLE230,CLE231,CLE232,CLE233
High Power Aluminum Gallium Arsenide IREDs
® _{Clairex}
Technologies, Inc.
February, 2001
0.158 (4.01)
0.136 (3.45)
0.190 (4.83)
0.176 (4.47)
0.210 (5.33)
0.190 (4.83)
1.00 (25.4) min.
0.100 (2.54) dia.
0.215 (5.46)
0.205 (5.21)
ANODE
CATHODE
0.050 (1.27)
0.030 (0.76)
0.025 (0.64) max.
0.019 (0.48)
0.016 (0.41)
ALL DIMENSIONS ARE IN INCHE_CS_a(_sM_eIL₂LIMETERS)
0.147 (3.73)
0.137 (3.48)
features
absolute maximum ratings (T_A = 25°C unless otherwise stated)
• narrow emission angle
storage temperature ...................................................................... -55°C to +150°C
• TO-46 hermetically sealed package
• excellent heat dissipation
• high power output
description
operating temperature ................................................................... -55°C to +125°C
lead soldering temperature⁽¹⁾ ......................................................................... 240°C
maximum continuous current⁽²⁾..................................................................... 100mA
peak forward current (10µs pulse width, 100pps) .............................................. 10A
maximum power dissipation⁽³⁾...................................................................... 170mW
The CLE230 series are AlGaAs
reverse voltage .................................................................................................... 3V
infrared emitting diodes mounted in
TO-46 hermetic packages. The
narrow emission angle provides high
on-axis intensity. The series are
spectrally and mechanically matched
to the CLT130 phototransistor series.
notes:
1. 0.06” (1.5mm) from the header for 5 seconds maximum. Maximum
temperature can be 260°C if wave soldering.
2. Derate linearly 1.0mA/°C from 25°C free air temperature to T_A = +125°C.
3. Derate linearly 1.7mW/°C from 25°C free air temperature to T_A = +125°C.
For additional information, call
Clairex.
electrical characteristics (T_A = 25°C unless otherwise noted)
symbol parameter
min typ max units test conditions
E_e
Irradiance⁽¹⁾
CLE230
1.0
-
CLE231
1.5
-
-
mW/cm^{2 I}F ^{= 100ma}
-
CLE232
2.6
-
-
CLE233
3.5
-
-
V_F
Forward voltage
-
-
1.8
V
I_F = 100ma
I_R
Reverse current
-
-
10
µA
V_R = 3.0V
λ_P
Peak emission wavelength
BW
Spectral bandwidth at half power points
-
880
-
-
80
-
nm
I_F = 100ma
nm
I_F = 20ma
Θ_HP
Emission angle at half power points
t_r
Output rise time
-
40
-
-
700
-
deg.
ns
I_F = 20ma
I_F = 100ma
t_f
Output fall time
-
700
-
ns
I_F = 100ma
note: 1. Measured into a 0.25” aperture, 1.20” from device lens.
Clairex reserves the right to make changes at any time to improve design and to provide the best possible product.
Clairex Technologies, Inc.
Phone: [phone]
1845 Summit Ave., #404
Fax: [phone]
Plano, Texas 75074-8148
www.clairex.com