|
CFPV-7 Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – Low Power Miniature SMD VCXO | |||
|
CFPV-7 Low Power Miniature SMD VCXO
ISSUE 4 - draft; 4 OCTOBER 2004
Delivery Options
â Please contact our sales office for current leadtimes
Description
â Voltage controlled crystal oscillator (VCXO) with crystal
packed into its own holder
â Grounded crystal enclosure acts like a shield and
provides low EMI
â Non PLL based design ensures low jitter
â 3.3V or 5V supply voltage
â CMOS, PECL, SINE or LVDS Output
RoHS Compliance
â Parts with the suffix âLFâ on the part number are fully
comliant with the European Union directive 2002/95/EC
on the restriction of the use of certain hazardous
substances in electrical and electronic equipment.
Note: The RoHS compliant parts are suitable for
assembly using both Lead-free solders (see Lead-free
Reflow soldering profile) and Tin / Lead solders
(see Tin / Lead Reflow soldering profile)
Standard Frequencies
â 8.192, 20.0, 24.576, 32.768, 34.368, 38.88, 39.3216,
44.736, 50.0, 51.84, 52.0, 61.44, 63.8976, 77.76, 80.0,
82.3341, 140.0, 155.52MHz
Frequency Range
â 2.0 to 170MHz
Package Outline
â 4-pad (style 578) or 6-pad (style 579) Industry Standard,
Glass Epoxy laminate (FR4) based with standard Tin/Lead
solder finish end terminations and High Temperature Plastic
cover
Supply Current
â 3.3V ±5% (option)
â 5.0V ±5% (option)
Supply Voltage
â Ranging from typ. 10mA @ 2MHz/3.3V CMOS to typ.
80mA @ 170MHz/5V PECL, at nominal load. Contact
sales office for specific values
CMOS Output (option)
â Load: 15pF nom.
â Duty Cycle @ 50%: 40/60%
â Rise & Fall Time (20 to 80%): < 2ns typ.
â VoH: >90% Vs
Europe Tel: +44 (0)1460 270200
Americas Tel: +1 919 941 9333
Asia Tel: +86 755 8826 5991
Fax: +44 (0)1460 72578
Fax: +1 919 941 9371
Fax: +86 755 8826 5990
â VoL: <10% Vs
â Tri-state control (6 pad package only)
Control Input Logic â0â (< 30% Vs) will put the output in
the tri-state mode
Control Input Logic â1â (> 70% Vs) or left unconnected
will enable the output
âActive Highâ is standard but a version with âActive Lowâ
can be supplied on request
Single Ended or Differential PECL Output (option)
â Load: 50⦠to Vs-2V
â Duty Cycle @ 50%: 40/60%
â Rise & Fall Time (20%-80%): < 0.5ns typ.
â VoH: 2.4V typ. @Vs=3.3V
â VoL: 1.5V typ. @Vs=3.3V
â Tri-state control
The output is enabled if tri-state control is:-
a) Left open circuit
b) Connected to GND
c) Connected to a voltage <(Vs-1.65V) = PECL logic low
The output is disabled if tri-state control is:-
a) Connected to Vs
b) Connected to a voltage >(Vs-0.96V) = PECL logic high
When disabled, pad 5 goes low and pad 4 goes high.
The tri-state control pad has an internal 75k⦠pull down
to GND resistor
Sine Output (option)
â Load: 50â¦
â Level: can be specified up to +8dBm
â Harmonics: < â20dBc
LVDS Output (option)
â Load: 100⦠differential +10pF each output to GND
â Diff. output voltage: ±250mV min. ±400mV max.
â Duty Cycle @ 50%: 40/60%
â Rise & Fall Time (20 to 80%): <0.5ns typ.
â Tri-state control (6 pad package only)
Control Input Logic â0â (0.8V) will put the output in
tri-state mode
Control Logicâ1â (>2.0V) will enable the output
Frequency Stability
â All causes stability (including calibration, temperature,
supply, load, reflow and ageing) can be specified down
to ±30ppm, 0 to 70°C or ±50ppm, â40 to 85°C. Please
specify operating condition; Temperature Range,
Lifetime, etc.
Website: www.cmac.com
|
▷ |