C2008 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – HEYCo-molded Liquid Tight Break-Thru Plugs

“Stay Connected with Heyco” Liquid Tight Cordgrips
ALL NEW
PRODUCTS!
HEYCo-molded^™ Liquid Tight
Break-Thru Plugs
Mounting Hole Diameter Range: .500˝ (12,7 mm) to 1.093˝ (27,8 mm)
PANEL DIMENSIONS
Thickness
Mounting
at Locking
Hole
Finger Steps Diameter*
in. mm. in. mm.
CABLE DIA. RANGE
in.
mm.
PART DESCRIPTION
NO.
Black
PART DIMENSIONS
A
B
Head
Overall
Diameter
Height
in. mm. in. mm.
.020 0,5 ^{.500 12,7 .080 - .200 2,0 - 5,1 C2008 LTBP 500-063 .92 23,4}
.032 0,8 ^{.625 15,9 .130 - .375 3,3 - 9,5 C2012 LTBP 625-063 1.03 26,2}
.040 1,0 ^{.750 19,1 .175 - .400 4,4 - 10,2 C2016 LTBP 750-063 1.15 29,2} .32 8,1
.048 1,2 ^{.875 22,2 .130 - .450 3,3 - 11,4 C2020 LTBP 875-063 1.28 32,5}
.063 1,6 ^{1.000 25,4 .200 - .715 5,1 - 18,2 C2022 LTBP 1000-063 1.43 36,3}
1.093 27,8 .250 - .765 6,4 - 19,4 C2024 LTBP 1093-063 1.53 38,9
Standard color black. Consult Heyco for other colors.
*Consult Heyco for other Mounting Hole Diameters. Our Axcell Rapid Response Team is ready to meet your requirements.
A
B
• These co-molded nylon and elastomer
parts function as Liquid Tight Plugs
with an IP 67/68 rating, yet can be
pierced by round wire, cable or tubing
to function as Liquid Tight Bushings
with the same resulting IP 67/68 rating.
• For use in panels as thin as
.020˝ (0,5 mm) and as thick as
.063˝ (1,6 mm). Parts for thicker
panels are under development.
• Provide liquid tight closure when
used as a plug. When pierced,
functions as a liquid tight bushing that
converts raw edged holes to smooth,
neat, insulated holes.
• Used as a liquid tight bushing,
HEYCo-molded Liquid Tight
Break-Thru Plugs insulate and
mechanically protect electrical and
telecommunications cable, tubing,
hose, rope, and utility lines.
• Locking fingers snap into holes with
fingertip pressure.
• Locking fingers in fractional increments
up to the maximum panel thickness.
• Withstands a push back force of
greater than 35 pounds.
• Available in multiple sizes for use in
.500˝ (12,7 mm) to 1.093˝ (27,8 mm)
diameter holes.
Materials
Flammability Rating
Temperature Rating
IP Rating
Nylon 6/6 and TPE
HB
-40°F (-40°C) to 212°F (100°C)
IP 67/68
1-800-526-4182 • 732-286-1800 (NJ) • FAX: [phone] • www.heyco.com
Quick
Specs
3-34