BT-11 Datasheet, PDF (1/12 Pages) List of Unclassifed Manufacturers – surface mount PCB module

Preliminary
Amp’ed RF, Inc.
(phone) 408 213-9530
(fax) 408 213-9533
Product Specification
Features
15mm x 27mm
Description
The added class 1 power, +16dBm, of the BT-11, gives this module one of
the best ranges in the industry. It’s completely pin compatible with the lower
power BT-21, and offers a second power choice on the same design.
The BT-11 module includes 16 general purpose input/output lines, several
serial interface options, analog-to-digital inputs, and up to 2M bps data
throughput.
The BT-11 is a surface mount PCB module that provides fully embedded,
ready to use Bluetooth wireless technology. The reprogrammable flash
memory contains embedded firmware for serial cable replacement using the
Bluetooth SPP profile. Other popular Bluetooth profiles, such as OBEX, are
also available.
Customized firmware for peripheral device interaction, power optimization,
security, and other proprietary features may be supported and can be
ordered pre-loaded and configured.
Additional Documentation
„ BT Hardware Design Guide
„ abSerial User Guide
„ abSerial Reference Guide
„ Bluetooth Radio
-
Fully embedded Bluetooth v2.1+EDR with profiles
-
Class 1 radio
-
Complete RF ready module
-
Wireless data communications
-
Integrated chip antenna
-
128-bit encryption security
-
Range up to 120m LOS
-
FCC & Bluetooth qualified
-
Integrated antenna or with coaxial external connector
„ ST Micro Cortex-M3 microprocessor up to 70MHz
„ Memory
-
256K bytes flash memory
-
48K bytes RAM memory
„ Data Rate
-
2M bps maximum data rate
-
Multipoint capability up to 7 slaves
„ Serial Interface
-
UART, up to 3.25M bps
-
SPI interface
-
I2C interface
-
USB v2.0
„ General I/O
-
16 general purpose I/O
-
4x12-bit A/D inputs
-
1 DAC output
„ User Interface
-
AT command set
-
Firmware upgrade over UART
©1 2008 Amp’ed RF Inc
10/07/08
1722 Ringwood Ave, Suite 250, San Jose, CA 95131, USA
www.ampedrf.com
BT-11 Datasheet
Page 1 of 12