English
Language : 

BLED-50W Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Budget Series Switch Mode LED Drivers
BLED-50W Series
Budget Series Switch Mode LED Drivers
Constant Current with Isolation
Black Magic Thermal Advantage™ Plastic Housing
Electrical Specifications
Input Voltage Range:
100-277 Vac Nom. (90-305 V Min/Max)
Frequency:
50/60 Hz Nom. (47-63 Hz Min/Max)
Power Factor:
>0.90 @ full load, 120V; >0.80 @ full load, 277V
Inrush Current:
<35 A max @ 230 Vac, cold start 25ºC
Input Current:
0.56 A max @ 120 Vac; 0.28 A max @ 230 Vac
Maximum Power:
50W
Line Regulation:
± 4%
Load Regulation:
± 5%
THD:
<_ 20% @ full load
Leakage Current:
300 µA Typical
Hold Up Time:
Half Cycle
Start-up Time:
< 1.0 S
Output Protection:
Over-Voltage, Over-Current, Short Circuit (auto-recovery)
Environmental Specifications
Minimum Starting Temp: -30ºC
Storage Temperature:
-40ºC to +85ºC
Maximum Case Temp. 90°C
Humidity:
5% to 95%
Cooling:
Convection
Sound Rating:
Class A
Vibration Frequency:
5 to 55 Hz/2g, 30 minutes
MTBF:
580,000 Hours @ full load, 40ºC per MIL-217F Notice 2
Impact Resistance:
1g/s
Weight:
8.2 oz (233 g)
• Smaller footprint than our standard drivers
• Total Power: 50 Watts
• Input Voltage: 100-277 Vac
• Indoor Applications, IP64
• UL Dry or Damp Location Rated
• 2 year Warranty
Constant Current - Product Specifications
Model Number
Output Current Output Voltage Max. Output Typical
(mA ±5%)
Range (Vdc) Power (W) Efficiency
BLED50W-200-C0250
250
120-200
50
90
BLED50W-142-C0350
350
85-142
50
90
BLED50W-100-C0500
500
60-100
50
89
BLED50W-072-C0700
700
43-72
50
89
BLED50W-054-C0910
910
32-54
50
88
BLED50W-048-C1040
1040
29-48
50
88
BLED50W-042-C1250
1250
25-42
52
87
BLED50W-039-C1200
1200
23-39
47
86
BLED50W-036-C1400
1400
21-36
50
86
BLED50W-028-C1750
1750
17-28
49
85
BLED50W-026-C2100
2100
16-26
55
84
BLED50W-012-C4200
4200
7-12
50
83
Class 2: US/Canada US Only
E332160
Note:
LED drivers are designed and intended to operate LED loads only.
Non-LED loading may be outside the specified design limits of our
LED drivers, and therefore cannot be covered by any warranty.
If you desire to use our LED drivers to operate non-LED loads
please contact us to discuss compatibility.
Specifications subject to change without notice.
Rev 8-12-15
Thomas Research Products • 1215 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com