BHR-03VS-1 Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – 4.0/8.0/12.0mm pitch/Disconnectable Crimp style connectors

BH CONNECTOR
Emboss Tape
4.0/8.0/12.0mm pitch/Disconnectable Crimp style connectors
HJST
1
HJST ₂
3
Low profile connectors with high
withstanding voltage, designed for
connecting liquid crystal display back light
lamps to their starters.
• Low profile
• SMT configuration
• Applicable to special wires
• Headers with locating bosses
• Housing lock also serves as polarizing device
Specifications –––––––––––––––––––
• Current rating: 1.0A AC, DC (AWG #22)
• Voltage rating: 600V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/10m Ω max.
After environmental testing/20m Ω max.
• Insulation resistance: 1,000M Ω min.
• Withstanding voltage: 1,800V AC/minute
• Applicable wire: AWG #28 to #22
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0 Recognized E60389
1^{Certified LR20812}
PC board layout (viewed from component side)
SMT type
(2 circuits 4mm pitch)
2-4
 ^ʶ

NJO
(2 ₁ci₇rcuits 8mm pitch)
 ^ʶ

 NJO
(2 circuits 8mm pitch with bosses)
 ^ʶ

 ^ʶ
 ^ʶ

NJO
Пɹʴ
1(27circuits 8mm pitch plugged up)
 ^ʶ

NJO
 ^ʶ

 ^ʶ

 ^ʶ

(2 circuits 12mm pitch)
2-12
18
 ^ʶ
NJO
 ^ʶ

 ^ʶ

 ^ʶ

(3 circuits 4mm pitch)
19
NJO
^ʶ

 ^ʶ

 ^ʶ

 ^ʶ

19-2
(3 circuits 4mm pitch plugged up)
NJO
^ʶ

^ʶ

 ^ʶ

 ^ʶ

(4 circuits 4mm pitch)
4-4
20
 ^ʶ
NJO
 ^ʶ

^ʶ

(4 circuits 4mm pitch with post removed)
2 4 ^4-4
 ^ʶ
 NJO
^ʶ

^ʶ

Through-hole type
22
 ^ʶ
 ^ʶ
^ʶ
П
Ê´

П^ʴ
 ^ʶ

 ^ʶ
 ^ʶ

 ^ʶ

^ʶ
 ^ʶ

Note: 1. Tolerances are for pattern non-cumulative: ±0.05mm for all centers. Tolerance for hole size is ±0.1.
2. Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as guideline. Contact JST for details.
1