BD5-H2-AH Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – Brushless DC Drive for 57mm 60W 24V motor

Applied Motion Products, Inc.
404 Westridge Dr.
Watsonville, CA 95076, USA
1-800-525-1609
Tel [phone]
Fax (831) 761-
6544
Product Datasheet
www.Applied-Motion.com
BD5-H2-AH
Brushless DC Drive for 57mm 60W 24V motor
1pc. - 186.00
50pc. - 139.50
Product Features
Velocity control
Simple setup
Compact design
3.2 A rms cont., 6.4 A rms peak
Runs on 12-48 VDC
8 digital inputs, 1 analog input
2 digital outputs
Performance-matched motors available
Description
The BD5-H2-AH is a compact and efficient drive for use with Applied Motion's BL060-H03-H series 57mm 60W brushless DC motors. It provides
stable velocity control over a wide speed range. Motor speed can be controlled by an on-board trimpot, a 0-5 volt analog input, or via the drive's
digital inputs. Dedicated stop and enable inputs are available, along with a dynamic braking feature that brings the motor to zero speed in a
quick and controlled fashion. Each drive comes pre-configured for use with the matching brushless DC motor.
The mating I/O connector, populated with connector pins and 12" flying leads, is included with each drive. The mating DC power connector is
also included.
The BL motors can plug directly into the BD drives. Extension cables are also available for longer distances between the drive and motor. Part
number 3004-272-1M is a 1 meter extension cable and 3004-272-3M is a 3 meter extension cable.