BBA-322-A_08 Datasheet, PDF (1/7 Pages) List of Unclassifed Manufacturers – BBA SERIES RF AMPLIFIER DATA GUIDE

BBA-322-A
BBA-519-A
WIRELESS MADE SIMPLE ^®
BBA SERIES RF AMPLIFIER DATA GUIDE
DESCRIPTION
The BBA Series is a family of low-cost high-
performance broadband RF amplifiers. The
modules are ideally suited to a wide range of
amplification and buffering applications,
including extending the range of Linx’s own RF
0.360" ^{AMP MODULE}
BBA-519-A
LOT 0100
modules (where legally appropriate). Housed in
a compact SMD package, the hybrid amps are
0.500"
matched to 50Ω source and load impedances.
The modules utilize a GaHBT gain stage, which
yields high gain and IP3, excellent flatness, and
0.130"
low noise. The BBA-322-A is the high gain
Typ.
model and is suitable for the LNA stage of many
receivers. This extra gain stage on the front end
of a receiver can improve the sensitivity and ^{Figure 1: BBA Package Dimensions}
provide a greater range for the product. The BBA-519-A is the high power model and
is suitable for the final gain stage in a transmitter. This amplifier can boost the output
power of a transmitter to much higher levels and provide a significant increase in
range (where legally appropriate).
BBA SERIES FEATURES
„ Prematched for 50Ω impedance
„ No external RF components
required
„ Exceptional gain flatness
„ Compact SMD package
„ Operates from a single supply
BBA-322-A FEATURES
BBA-519-A FEATURES
„ High gain
„ 3.8dB noise figure
„ DC-3GHz broadband operation
„ +20dB small signal gain at
900MHz
„ Up to +10dB (10mW) linear
output power
APPLICATIONS INCLUDE
„ High output
„ 4.8dB noise figure
„ 10MHz-3GHz broadband
operation
„ +18dB small signal gain at
900MHz
„ Up to +17dB (50mW) linear
output power
„ TX / RX Range Enhancement
„ IF or RF Buffering
„ Driver or Final Stage for PA
„ General Purpose Gain Blocks
ORDERING INFORMATION
PART #
DESCRIPTION
BBA-322-A
High Gain RF Amplifier
BBA-519-A
High Power RF Amplifier
Amplifiers are supplied in tubes of 50 pcs.
Revised 1/28/08