BA1R Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – Multi-function or mono-function

BA1R
Timers
Syrline
17.5 mm - 1 Relay 16A
›› Multi-function or mono-function
›› Multi-range (12 function)
›› Multi-voltage 12 →240 V AC/DC
›› LED status indicator (relay version)
›› Possibility of external load connection in parallel to the
control input
›› 3-wire PNP sensor compatible
Specifications
Functions
A-At
Delay
0,1 s →10 days
Output
1 changeover relay
Nominal rating
16 A
Connections
Screw terminals
Supply voltage
12 →240 V ∿/⎓
Code
BA1R16MV1
Output relay
Contact arrangement
Maximum switching voltage
Switching current rate (resistive)
Minimum switching contact
Maximum switching power (resistive)
Electrical life
Maximum rate (at max switching power)
Mechanical life
Rated impulse voltage
Dielectric strength between coil / contacts
Dielectric strength between open contacts
Timing
Timing ranges (7 ranges)
Minimum pulse duration typically (relay version)
Maximum reset time by de-energisation typically (relay version)
Repeatability
Repetition accuracy with constant parameters
Drift Temperature
Voltage-dependent drift
Supply
Multi-voltage power supply
Operating range
Operating frequency (Hz)
Galvanic isolation
Max. absorbed power
Immunity from micro power cuts
1 CO (SPDT) (ChangeOver -Simple Pole Double Throw-)
250 VAC/ 16 A resistive / 250 VDC / 0.3 A resistive
NO / NC: 16 A 250 V AC / 16 A 30 VDC @ 25°C
NO / NC: 8 A 250 V AC / 8 A 30 VDC @ 60°C
10 mA / 5 VDC
4000 VA / 90 W @ 25°C
30x10³ cycles (NO) at 250 VAC/ 16 A resistive
360 cycles /hour
30 x 10⁶ cycles
5 kV (1.2/50µs)
IEC 60664-1: 5 kV /1 min / 1 mA / 50 Hz
1 kV /1 min / 1 mA / 50 Hz
0.5→10s, 0.05→1min, 0.5→10min, 0.05→1h,
0.5→10h, 0.05→1day, 0.5→10days
IEC 1812-1: 30 ms / 100 ms with load
IEC 1812-1: 120 ms
IEC 1812-1: ≤ ± 0,5 %
IEC 1812-1: ≤ ± 10 %
≤ ± 0.05 % / °C
≤ ± 0.2 % / V
12→240 V∿/⎓
15 %, +10 %
50 / 60 Hz ± 5 %
No
Approx. 3 VA (V∿) 1.5 W (V⎓)
10 ms