B6B-PH-SM4-TBLFSN Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – 2.0mm pitch/Disconnectable Crimp style connectors

PH CONNECTOR
Emboss Tape
2.0mm pitch/Disconnectable Crimp style connectors
This is a thin, low-profile 2.0mm pitch
connector 8.0mm in height after mounting
and 4.5mm in width. It is designed to meet
the demand for high-density connection of
internal wires to printed circuit boards. It is
compact, highly reliable and low in cost.
• Reliable contact
• Fully shrouded header
• Printed circuit board retention mechanism
• Surface mount model (SMT)
Specifications –––––––––––––––––––
• Current rating: 2A AC, DC (AWG #24)
• Voltage rating: 100V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/ 10m Ω max.
After environmental testing/ 20m Ω max.
• Insulation resistance: 1,000M Ω min.
• Withstanding voltage: 800V AC/ minute
• Applicable wire: AWG #32 to #24
• Applicable PC board thickness: 0.8 to 1.6mm
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0 Recognized E60389
1^{Certified LR20812}
2^R75087
ʪThrough-hole type (viewed from soldering side) ʫ
Top entry type
Side entry type
 ^ʶ


 ^ʶ



П

Ê´

ɹ

П

Ê´

ɹ


Note: 1. Tolerances are non-cumulative: ±0.05mm for all centers.
2. Hole dimensions differ according to the kind of PC board and piercing method. If PC boards made of hard material are used, the hole dimensions should
be larger. The dimensions above should serve as a guideline. Contact JST for details.
ʪSMT type (viewed from component side) ʫ
SM4 type
Top entry type
 ^ʶ
 ^ʶ  ^ʶ
End face of wafer
on the mating side

ʢʣ

SM4 type
Side entry type
 ^ʶ
 ^ʶ  ^ʶ
End face of wafer
on the mating side



Circuit No.1
 NJO
Note: 1. Tolerances are non-cumulative: ±0.05mm for all centers.
2. The dimensions above should serve as a guideline. Contact JST for details.
NJO
Circuit No.1
1