B06P-VL Datasheet, PDF (1/5 Pages) List of Unclassifed Manufacturers – 6.2mm pitch/Disconnectable Crimp style connectors

VL CONNECTOR
6.2mm pitch/Disconnectable Crimp style connectors
This VL connector is designed for wire-to-
wire and wire-to-board 6.2mm pitch
connector corresponding to large current.
Secondary retainer, which prevents from
insufficient insertion of contact and coming
off contact, may use and large current
circuit can be connected certainly and
safety.
• Housing lances for contact retention
• Secondary retainer
• Suited for large current
• Two kinds of connections
Specifications–––––––––––––––––––
• Current rating: 20A AC, DC (Refer to the table below.)
• Voltage rating: 600V AC, DC
• Temperature range: -25˚C to +90˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/7m Ω max.
After environmental testing/10m Ω max.
• Insulation resistance: 1,000M Ω min.
• Withstanding voltage: 2,000V AC/minute
• Applicable wire: AWG #22 to #12
• Applicable PC board thickness: 1.6mm
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Note: The current rating differs depending on the number of circuits and the
wire size used in each connector. The table below lists the current rating
as a function of the number of circuits and the wire size.
$JSDVJUT
ˌ






















ˌ











8JSF
TJ[F "8(
ˌ
ˌ
































ˌ











$VSSFOU
VOJU"
ˌ











Note: Do not branch in parallel current which exceeds the rated current (eg. more than
17A in the case of 3 circuits with AWG #12). If branched in parallel, current
imbalance or other problems may develop. If it is absolutely necessary to branch
such a large current in parallel, design the circuits without causing any imbalance
and provide an extra margin for each circuit.
Standards ––––––––––––––––––––––
0 Recognized E60389
1^{Certified LR20812}
2 ^R9351103
PC board layout (viewed from soldering side) and Assembly layout
(2, 3, Single-row 4 circuits)
ʢʣ

(4, 6, 8, 12 circuits)
Single-row 4 circuitsɿП ^ʶ
2, 3 circuitsɿП^ʶ
" ^ʶ
 ^ʶ
 NJO
П^ʶ
"^ʶ
 NJO
 ^ʶ
ʢʣ

<Inner-housing lock>
ʢʣ

<Inner-housing lock>
ʢʣ

<Outer-housing lock>
<Outer-housing lock>
Note: 1. Tolerances are non-cumulative: ±0.05mm for all centers.
2. Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details.
1