|
B04B-PNISK-1ALFSN Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – 2.0mm pitch/Disconnectable Crimp style connectors | |||
|
PNI CONNECTOR
ɹ2.0mm pitch/Disconnectable Crimp style connectors
This is a 2.0mm pitch wire-to-board
connector, having incomplete mating
prevention mechanism.
⢠Inertial lock structure
⢠Finger-friendly design
⢠Secure locking structure
Specifications âââââââââââââââââââ
⢠Current rating: 3A AC, DC (AWG#22)
⢠Voltage rating: 100V AC, DC
⢠Temperature range: -25ËC to +85ËC
(including temperature rise in applying
electrical current)
⢠Contact resistance: Initial value/ 10m ⦠max.
After environmental testing/ 20m ⦠max.
⢠Insulation resistance: 1,000M ⦠min.
⢠Withstanding voltage: 800V AC/minute
⢠Applicable wire: AWG #28 to #22
⢠Applicable PC board thickness: 1.6mm
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standardsâââââââââââââââââââââââ
0 Recognized E60389
1Certified LR20812
ʶ
"ʶ
Ð Ê´
ʶ
Ð Ê´
Note: 1. The above figure is the figure viewed from the connector mounting side.
2. Tolerances are non-cumulative: ±0.05mm for all centers.
3. Hole dimensions differ according to the kind of PC board and piercing method.
The dimensions above should serve as a guideline. Contact JST for details.
1
|
▷ |