AZ821_05 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – SUBMINIATURE DIP RELAY

AZ821/AZ831
SUBMINIATURE
DIP RELAY
FEATURES
• Low profile for compact board spacing
• DC coils to 48 VDC
• Single button crossbar contacts
• High sensitivity, 100 mW pickup
• Life expectancy to 15 million operations
• High switching capacity, 60 W, 120 VA
• Fits standard 16 pin IC socket
• Epoxy sealed for automatic wave soldering and cleaning
• Meets FCC Part 68.302 1500 V lightning surge
• Meets FCC Part 68.304 1000 V dielectric
• UL, CUR file E43203
CONTACTS
Arrangement
Ratings
Rated Load
UL
CSA
Material
Resistance
DPDT (2 Form C)
Resistive load:
Max. switched power: 60 W or 120 VA
Max. switched current: 2 A
Max. switched voltage: 150 VDC or 240 VAC
1.25 A, 100 VDC, 30 W
0.5 A, 125 VAC
1.25 A, 150 VAC, 150 VDC, 30W, 50 VA
Gold/silver alloy, gold plated
< 50 milliohms initially
200 milliohms at end of life
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
AZ821: 250 mW
AZ831: 100 mW
1.7 W at 20°C (68°F)
1.3 W at 40°C (104°F)
AZ821: 37°C (67°F) at nominal coil voltage
AZ831: 18°C (32°F) at nominal coil voltage
Max. 115°C (239°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Other coil resistances and sensitivities available upon request.
4. Specifications subject to change without notice.
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
15 x 10⁶
1 x 10⁵ at 2 A 30 VDC Res.
Operate Time (typical) 3 ms at nominal coil voltage
Release Time (typical) 2 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
1500 Vrms coil to contact
(at sea level for 1 min.) 1000 Vrms contact to contact
Insulation Resistance 1000 megohms min. at 20°C, 500 VDC,
50% RH
Dropout
Greater than 10% of nominal coil voltage
Capacitance
Contact to contact: 2.0 pF
Contact set to contact set: 1.5 pF
Contact to coil: 5.0 pF
Ambient Temperature
Operating
Storage
At nominal coil voltage
AZ821: -40°C (-40°F) to 75°C (167°F)
AZ831: -40°C (-40°F) to 95°C (203°F)
-40°C (-40°F) to 115°C (239°F)
Vibration
1.5 mm DA at 10–55 Hz
Shock
Enclosure
40 g 11 ms ¹/2 sine
P.B.T. polyester 94 V-0
Terminals
Tinned copper alloy
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight
6 grams
5/25/05