ATV212H075M3X Datasheet, PDF (1/11 Pages) List of Unclassifed Manufacturers – variable speed drive ATV212

Product data sheet
Characteristics
ATV212H075M3X
variable speed drive ATV212 - 0.75kW - 1hp -
240V - 3ph - wo EMC - IP21
Complementary
Apparent power
Prospective line Isc
Continuous output current
Maximum transient current
Speed drive output frequency
Nominal switching frequency
Switching frequency
Speed range
Speed accuracy
Torque accuracy
Transient overtorque
Asynchronous motor control profile
Regulation loop
Motor slip compensation
Local signalling
Output voltage
Isolation
Type of cable for external connection
Jun 15, 2015
Main
Range of product
Product or component
type
Device short name
Product destination
Product specific appli-
cation
Assembly style
Network number of
phases
Motor power kW
Motor power hp
Power supply voltage
Power supply voltage
limits
Supply frequency
Network frequency
EMC filter
Line current
Altivar 212
Variable speed drive
ATV212
Asynchronous motors
Pumps and fans in HVAC
With heat sink
3 phases
0.75 kW
1 hp
200...240 V (- 15...10 %)
170...264 V
50...60 Hz (- 5...5 %)
47.5...63 Hz
Without EMC filter
3.3 A for 200 V
2.7 A for 240 V
1.8 kVA for 240 V
5 kA
4.6 A at 230 V
5.1 A for 60 s
0.5...200 Hz
12 kHz
12...16 kHz with derating factor
6...16 kHz adjustable
1...10
+/- 10 % of nominal slip for 0.2 Tn to Tn torque variation
+/- 15 %
120 % of nominal motor torque, +/- 10 % for 60 s
Voltage/Frequency ratio, 2 points
Voltage/Frequency ratio, 5 points
Flux vector control without sensor, standard
Voltage/Frequency ratio - Energy Saving, quadratic U/f
Voltage/Frequency ratio, automatic IR compensation (U/f + automatic Uo)
Adjustable PI regulator
Adjustable
Automatic whatever the load
Not available in voltage/frequency ratio motor control
1 LED - red - DC bus energized
<= power supply voltage
Electrical between power and control
UL 508 cable with UL Type 1 kit: 3 wire(s) - 40 °C, copper 75 °C / PVC
IEC cable without mounting kit: 1 wire(s) - 45 °C, copper 70 °C / PVC
IEC cable without mounting kit: 1 wire(s) - 45 °C, copper 90 °C / XLPE/EPR
1