ATC920C Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Rugged Construction

ATC 920 C Series X7R
Ceramic RF Power
Multilayer Capacitors
• Case C Size
(.250" x .250")
• Capacitance Range
0.01 µF to 1 µF
• Low ESR/ESL
• Non Magnetic
• Rugged Construction • High Reliability
• Manufactured for ATC • Mid-K
• RoHS Compliant
ATC’s 920C Series MLC capacitors offer superior quality at a
competitive price. This MLC Series is manufactured for ATC in
accordance with ATC’s high quality standards. Ceramic construction
provides a rugged and reliable hermetic package. Available
termination styles include a standard solder plate over a nickel
barrier for most applications and palladium silver for non-magnetic
applications commonly used in medical electronics.
Typical functional applications: Bypass, Coupling, and DC Blocking.
Typical circuit applications: HF Amplifiers, Switching Mode Power
Supplies (SMPS), High Frequency SMPS Filters.
ENVIRONMENTAL TESTS
ATC 920 C Series Capacitors are designed and manufactured to
meet and exceed the requirements of EIA-198, MIL-PRF-55681 and
MIL-PRF-123.
THERMAL SHOCK:
MIL-STD-202, Method 107, Condition A.
MOISTURE RESISTANCE:
MIL-STD-202, Method 106.
LOW VOLTAGE HUMIDITY:
MIL-STD-202, Method 103, Condition A, with 1.5 Volts DC applied
while subjected to an environment of 85°C with 85% relative
humidity for 240 hours min.
LIFE TEST:
MIL-STD-202, Method 108, for 2000 hours, at 125°C.
200% WVDC applied.
ELECTRICAL AND MECHANICAL
SPECIFICATIONS
DISSIPATION FACTOR (DF): 2.5% max. at 1 KHz.
TEMPERATURE COEFFICIENT OF CAPACITANCE (TCC):
Less than ±15% (-55°C to +125°C)
INSULATION RESISTANCE (IR):
0.01 MFd to 1 MFd
1000 megohms min. @ +25°C at rated WVDC.
100 megohms min. @ +125°C at rated WVDC.
WORKING VOLTAGE (WVDC):
See Capacitance Values Table, page 2.
DIELECTRIC WITHSTANDING VOLTAGE (DWV):
Case C: 250% of rated WVDC for 5 secs.
AGING EFFECTS: 3% maximum per decade hour.
PIEZOELECTRIC EFFECTS: Negligible
DIELECTRIC ABSORPTION: 2% typical
OPERATING TEMPERATURE RANGE:
-55°C to +125°C (No derating of working voltage).
TERMINATION STYLE: W Termination – Solder Plate.
T Termination – Tin Plated over Nickel Barrier
TN Termination – Tin Plated over Non-Magnetic Barrier
CN Termination (Non-Magnetic) Palladium Silver
See Mechanical Configuration Table, page 2.
TERMINAL STRENGTH: Terminations for chips, withstand a
pull of 10 lbs. min., 15 lbs. typical, for 5 seconds in direction
perpendicular to the termination surface of the capacitor. Test
per MIL-STD-202, method 211.
ATC # 001-959
Rev D; 4/12