ATC800E Datasheet, PDF (1/5 Pages) List of Unclassifed Manufacturers – Ultra-Stable Performance

ATC 800 E Series
NPO Ceramic
High RF Power Multilayer
Capacitors
• Case E Size
• Capacitance Range:
(.380" x .380") 3.3 pF to 5100 pF
• High Q
• Ultra-Stable Performance
• Ultra Low ESR • High RF Current/Voltage
• High RF Power • High Reliability
• 7200 WVDC
• RoHS Compliant, Pb free
ATC’s 800 E Series offers superb performance in demanding high RF
power applications requiring consistent and reliable operation. The
combination of highly conductive metal electrode systems, optimized
case geometries, and proprietary dielectrics, yields the lowest ESR.
ATC’s new NPO low loss rugged dielectrics are designed to provide
superior heat transfer in high RF power applications. Ultra-low ESR
and superior thermal performance insure that the 800 E Series
products are your best choice for high RF power applications from
VHF through microwave frequencies.
Typical functional applications: Bypass, Coupling, Tuning, Impedance
Matching and DC Blocking
Typical circuit applications: HF/RF Power Amplifiers, Transmitters,
Antenna Tuning, Plasma Chambers and Medical (MRI coils).
ENVIRONMENTAL TESTS
ATC 800 E Series Capacitors are designed and manufactured to
meet and exceed the requirements of EIA-198, MIL-PRF-55681 and
MIL-PRF-123.
THERMAL SHOCK:
MIL-STD-202, Method 107, Condition A
MOISTURE RESISTANCE:
MIL-STD-202, Method 106
LOW VOLTAGE HUMIDITY:
MIL-STD-202, Method 103, Condition A, with 1.5 Volts DC applied
while subjected to an environment of 85°C with 85% relative
humidity for 240 hours min.
LIFE TEST:
MIL-STD-202, Method 108, for 2000 hours, at 125°C.
Voltage applied.
120% of WVDC for capacitors rated at 1250 volts DC or less.
100% of WVDC for capacitors rated above 1250 volts DC
ELECTRICAL AND MECHANICAL
SPECIFICATIONS
QUALITY FACTOR (Q):
Greater than 5,000 (3.3 pF to 1000 pF) @ 1 MHz.
Greater than 5,000 (1100 pF to 5100 pF) @ 1 KHz.
Temperature Coefficient of Capacitance (TCC):
0 ±30 PPM/°C (-55°C to +125°C)
Insulation Resistance (IR):
10⁵ Megohms min. @ +25°C at rated WVDC
10⁴ Megohms min. @ +125°C at rated WVDC
Max. test voltage is 500 VDC.
Working Voltage (WVDC):
See Capacitance Values Table, page 2
Dielectric Withstanding Voltage (DWV):
120% of WVDC for 5 seconds..
Retrace: Less than ±(0.02% or 0.02 pF), whichever is greater
Aging Effects: None
Piezoelectric Effects: None
(No capacitance variation with voltage or pressure)
CAPACITANCE Drift: ±(0.02% or 0.02 pF), whichever is greater
Operating Temperature Range:
From -55°C to +125°C
Termination Style:
See Mechanical Configurations, page 3
Terminal Strength: Terminations for chips withstand a pull of 10
lbs. min., 25 lbs. typical, for 5 seconds in direction perpendicular
to the termination surface of the capacitor. Test per MIL-STD-202,
method 211.
ISO 9001
REGISTERED
COMPANY
ATC # 001-1077 Rev. N, 1/14