ATC700E Datasheet, PDF (1/6 Pages) List of Unclassifed Manufacturers – High RF Current/Voltage

ATC 700 E Series NPO
Porcelain High RF Power
Multilayer Capacitors
• Case E Size
(.380" x .380")
• Capacitance Range
1 pF to 2200 pF
• High Q
• Ultra-Stable NPO Performance
• Low ESR/ESL • High RF Current/Voltage
• High RF Power
• Extended WVDC
up to 7200 VDC
• High Reliability
• Available with
Encapsulation Option*
ELECTRICAL AND MECHANICAL
SPECIFICATIONS
ATC, the industry leader, offers new improved ESR/ESL performance
for the 700 E Series RF Capacitors. This high Q multilayer capacitor
is ultra-stable under high RF current and voltage applications with
NPO performance. High density porcelain construction provides a
rugged, hermetic package.
ATC offers an encapsulation option for applications requiring ex-
tended protection agains arc-over and corona.
Typical functional applications: Bypass, Coupling, Tuning, Imped-
ance Matching and DC Blocking.
Typical circuit applications: HF/RF Power Amplifiers, Transmitters,
Antenna Tuning, Plasma Chambers and Medical (MRI coils).
*For leaded styles only
ENVIRONMENTAL TESTS
ATC 700 E Series Capacitors are designed and manufactured to
meet and exceed the requirements of EIA-198, MIL-PRF-55681
and MIL-PRF-123.
THERMAL SHOCK:
MIL-STD-202, Method 107, Condition A.
MOISTURE RESISTANCE:
MIL-STD-202, Method 106.
LOW VOLTAGE HUMIDITY:
MIL-STD-202, Method 103, Condition A, with 1.5 Volts DC applied
while subjected to an environment of 85°C with 85% relative hu-
midity for 240 hours min.
LIFE TEST:
MIL-STD-202, Method 108, for 2000 hours, at 125°C.
Voltage applied.
120% of WVDC for capacitors rated at 1250 volts DC or less.
100% of WVDC for capacitors rated above 1250 volts DC.
QUALITY FACTOR (Q):
Greater than 10,000 (1 pF to 1000 pF) @ 1 MHz.
Greater than 10,000 (1100 pF to 2200 pF) @ 1 KHz.
TEMPERATURE COEFFICIENT OF CAPACITANCE (TCC):
0 ±30 PPM/°C (-55°C to +125°C)
INSULATION RESISTANCE (IR):
1 pF to 2200 pF:
10⁵ Megohms min. @ +25°C at 500 VDC.
10⁴ Megohms min. @ +125°C at 500 VDC.
WORKING VOLTAGE (WVDC):
See Capacitance Values Table, page 2.
DIELECTRIC WITHSTANDING VOLTAGE (DWV):
150% of WVDC for capacitors rated at 1250 volts DC or less for 5 seconds.
120% of WVDC forÏ capacitors rated above 1250 volts DC for 5 seconds.
RETRACE: Less than ±(0.02% or 0.02 pF), whichever is greater.
AGING EFFECTS: None
PIEZOELECTRIC EFFECTS: None
(No capacitance variation with voltage or pressure).
CAPACITANCE DRIFT: ±(0.02% or 0.02 pF), whichever is greater.
OPERATING TEMPERATURE RANGE:
From -55°C to +125°C (No derating of working voltage).
TERMINATION STYLES:
Available in various surface mount and leaded styles.
See Mechanical Configurations, page 3.
TERMINAL STRENGTH: Terminations for chips and pellets
withstand a pull of 10 lbs. min., 25 lbs. typical, for 5 seconds in
direction perpendicular to the termination surface of the capac-
itor. Test per MIL-STD-202, method 211.
ATC # 001-943 Rev. K 6/13