ATC550L Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Ultra-Broadband Capacitor

A T C 5 5 0 L S E R I E S U B C ^TM C A P A C I T O R S
ATC 550L Series UBC^TM
Ultra-Broadband Capacitor
Features:
• EIA 0402 Case Size
• Capacitance: 100 nF
• Operating Frequency:
16 KHz (-3 dB roll-off) to 40+ GHz*
• Insertion Loss: < 0.5 dB typical
• Orientation Insensitive
• One Piece Construction
• Voltage Rating: 16 WVDC**
• RoHS Compliant Terminations
• Gold Terminations Available
ATC’s new 550L Ultra-Broadband Capacitor is manufac-
tured with highest quality materials to provide reliable
and repeatable Ultra-Broadband performance from 16
KHz through 40+ GHz. It exhibits ultra-low insertion loss,
flat frequency response and excellent return loss, and is
ideal for D.C. Blocking, Coupling, Bypassing and Feedback
applications requiring Ultra-Broadband performance.
The 550L is a one-piece orientation-insensitive 0402 SMT
package, fully compatible with high speed automated
pick-and-place manufacturing. It is designed to meet
the most stringent requirements of Ultra-Broadband ap-
plications.
ATC 550L Series Insertion Loss (S21)
Patented Design
Advantages:
• Ultra-Broadband
Performance
• Ultra-Low
Insertion Loss
• Flat Frequency Response
• Excellent Return Loss
• Unit-to-Unit Performance
Repeatability
• Rugged
Ceramic Construction
Applications:
• Optoelectronics/
High Speed Data
• Transimpedance
amplifiers
• ROSA/TOSA†
• SONET††
• Broadband Test
Equipment
• Broadband Microwave/
millimeter-wave
* 25 °C, no bias applied
**Operating Temperture dependent
† Receive and Transmit Optical
Sub-Assembly
†† Synchronous Optical Network
ATC 550L Series Return Loss (S11)
ATC 550L Data Sheet Test Condition Description
ATC testing to 40 GHz performed on 10-mil-thick Rogers RO4350 microstrip board, with the device under test subtending a 24 mil gap in a 22-mil-wide center
trace (nominal 50-ohm characteristic impedance). Modelithics model developed through testing on several different substrates, including 5-mil-thick Alumina
measured through 65 GHz. The modeled results presented for RO4350 were for a pad width of 20 mils and a gap of 16 mils.
Modeled data by
Modelithics Corp.
ATC # 001-1066
Rev. G; 3/13