ATC400Z1R0PT50T Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – ATC 400 Z Series Precision Tolerance NPO RF Microwave Capacitors

ATC 400 Z Series
Precision Tolerance NPO
RF Microwave Capacitors
• EIA Case Size 0201
• Capacitance Range 0.1 pF to 22 pF
• Tolerances to ±0.02 pF
• Ultra Stable Performance
• RoHS Compliant / Lead-Free
ATC’s new 400Z Series Precision Tolerance, Thin Film, NPO RF
Microwave Capacitor is manufactured with the highest quality materials to
provide reliable and repeatable performance. The 400Z is constructed with
a low loss silicon dioxide and silicon oxynitride dielectric along with high
quality sputtered electrode materials to insure superior performance.
High electrical and thermal conductivity and high stability over temperature
make this device suitable for a variety of critical small and large signal RF
and microwave applications. This Series offers the tightest tolerances
available over a wide range of capacitance values.
The 400Z is built in an 0201 SMT package and is fully compatible with high
speed automated pick-and-place manufacturing. It is designed to meet the
most stringent RF and Microwave requirements.
Typical applications: Filter Networks, Matching Networks, High Q
Frequency Sources, Tuning, Coupling, Bypass and DC Blocking.
ENVIRONMENTAL TESTS
LIFE TEST:
MIL-STD-202F,Method 108A, for 1000 hours, at 125°C.
200% WVDC applied.
ACCELERATED DAMP HEAT STEADY STATE
MIL-STD-202, Method 106: 85°C, 85% RH, at rated WVDC, 1000 hours
TEMPERATURE CYCLING
MIL-STD-202F METHOD 107E: -55°C to +125°C, 15 cycles
RESISTANCE TO SOLDER HEAT IEC-68-2-58:
260°C ±5°C for 10 secs.
ELECTRICAL AND MECHANICAL
SPECIFICATIONS
TEMPERATURE COEFFICIENT OF CAPACITANCE (TCC):
0 ±30 PPM/°C (-55°C to +125°C) 0.1 to 3.9 pF
0 ±60 PPM/°C (-55°C to +125°C) 4.0 to 22 pF
INSULATION RESISTANCE (IR):
10¹⁰ Megohms min. @ +25°C at rated WVDC
WORKING VOLTAGE (WVDC):
See Capacitance Values Table, page 2
DIELECTRIC WITHSTANDING VOLTAGE (DWV):
250% of rated WVDC for 5 secs
AGING EFFECTS: None
DIELECTRIC ABSORPTION: 0.01%
SOLDERABILITY, IEC-68-2-58: Components completely immersed in a
solder bath at 235°C for 2 secs.
LEACH RESISTANCE, IEC-68-2-58: Components completely immersed
in a solder bath at 260 ±5°C for 60 secs.
ADHESION, MIL-STD-202F, METHOD 211A: a force of 1.1 lbs. applied
for 10 secs.
OPERATING TEMPERATURE RANGE:
From -55°C to +125°C (No derating of working voltage)
TERMINAL STRENGTH IEC-68-2-21, AMEND. 2: a force of 1.1 lbs.
applied for 10 secs.
STORAGE: 12 months minimum with components stored in “as
received” packaging
ISO 9001
REGISTERED
COMPANY
ATC # 001-1124 Rev. B, 9/13