ATC200B Datasheet, PDF (1/6 Pages) List of Unclassifed Manufacturers – Rugged Construction

ATC 200 B Series
BX Ceramic
Multilayer Capacitors
• Case B Size
(.110" x .110")
• Low ESR/ESL
• Rugged Construction
• Capacitance Range
5000 pF to 0.1 µF
• Mid-K
• High Reliability
ATC, the industry leader, offers new improved ESR/ESL perform-
ance for the 200 B Series Capacitors. This Series exhibits high
volumetric efficiency with superior IR characteristics. Ceramic
construction provides a rugged, hermetic package.
Typical functional applications: Bypass, Coupling and DC Blocking.
Typical circuit applications: Switching Power Supplies and High
Power Broadband Coupling.
ENVIRONMENTAL TESTS
ATC 200 B Series Capacitors are designed and manufactured to
meet and exceed the requirements of EIA-198, MIL-PRF-55681
and MIL-PRF-123.
THERMAL SHOCK:
MIL-STD-202, Method 107, Condition A.
MOISTURE RESISTANCE:
MIL-STD-202, Method 106.
LOW VOLTAGE HUMIDITY:
MIL-STD-202, Method 103, Condition A, with 1.5 Volts DC ap-
plied while subjected to an environment of 85°C with 85% relative
humidity for 240 hours min.
LIFE TEST:
MIL-STD-202, Method 108, for 2000 hours, at 125°C.
200% WVDC applied.
ELECTRICAL AND MECHANICAL
SPECIFICATIONS
DISSIPATION FACTOR (DF): 2.5% max. @ 1 KHz
TEMPERATURE COEFFICIENT OF CAPACITANCE (TCC):
±15% maximum (-55°C to +125°C)
INSULATION RESISTANCE (IR):
5000 pF to 0.1 MFd:
10⁴ Megohms min. @ +25°C at rated WVDC.
10³ Megohms min. @ +125°C at rated WVDC.
WORKING VOLTAGE (WVDC):
See Capacitance Values Table, page 2.
DIELECTRIC WITHSTANDING VOLTAGE (DWV):
Case B: 250% of rated WVDC for 5 secs. (125 VDC)
AGING EFFECTS: 3% maximum per decade hour.
PIEZOELECTRIC EFFECTS: Negligible
DIELECTRIC ABSORPTION: 2% typical
OPERATING TEMPERATURE RANGE:
From -55°C to +125°C (No derating of working voltage).
TERMINATION STYLES:
Available in various surface mount and leaded styles.
See Mechanical Configurations, page 3.
TERMINAL STRENGTH: Terminations for chips and pellets
withstand a pull of 5 lbs. min., 15 lbs. typical, for 5 seconds in
direction perpendicular to the termination surface of the capac-
itor. Test per MIL-STD-202, method 211.
ATC # 001-812 Rev. L, 8/13