ATC100A Datasheet, PDF (1/6 Pages) List of Unclassifed Manufacturers – Ultra-Stable Performance

ATC 100 A Series
Porcelain Superchip^®
Multilayer Capacitors
• Case A Size
• Capacitance Range
(.055" x .055") 0.1 pF to 100 pF
• High Q
• Ultra-Stable Performance
• Low ESR/ESL • High Self-Resonance
• Low Noise
• Established Reliability (QPL)
• Extended WVDC
up to 250 VDC
ATC, the industry leader, offers new improved ESR/ESL perform-
ance for the 100 A Series RF/Microwave Capacitors. This is ATC's
most versatile high Q, high self resonant multilayer capacitor.
High density porcelain construction provides a rugged, hermetic
package.
Typical functional applications: Bypass, Coupling, Tuning, Feed-
back, Impedance Matching and DC Blocking.
Typical circuit applications: Microwave/RF/IF Amplifiers, Mixers,
Oscillators, Low Noise Amplifiers, Filter Networks, Timing Cir-
cuits and Delay Lines.
ENVIRONMENTAL TESTS
ATC 100 A Series Capacitors are designed and manufactured to
meet and exceed the requirements of EIA-198, MIL-PRF-55681
and MIL-PRF-123.
THERMAL SHOCK:
MIL-STD-202, Method 107, Condition A.
MOISTURE RESISTANCE:
MIL-STD-202, Method 106.
LOW VOLTAGE HUMIDITY:
MIL-STD-202, Method 103, Condition A, with 1.5 Volts DC ap-
plied while subjected to an environment of 85°C with 85% rela-
tive humidity for 240 hours min.
LIFE TEST:
MIL-STD-202, Method 108, for 2000 hours, at 125°C.
200% WVDC applied.
ELECTRICAL AND MECHANICAL
SPECIFICATIONS
QUALITY FACTOR (Q): greater than 10,000 at 1 MHz.
TEMPERATURE COEFFICIENT OF CAPACITANCE (TCC):
+90 ±20 PPM/°C (-55°C to +125°C)
INSULATION RESISTANCE (IR):
0.1 pF to 100 pF:
10⁶ Megohms min. @ +25°C at rated WVDC.
10⁵ Megohms min. @ +125°C at rated WVDC.
WORKING VOLTAGE (WVDC):
See Capacitance Values Table, page 2.
DIELECTRIC WITHSTANDING VOLTAGE (DWV):
250% of rated WVDC for 5 secs.
RETRACE: Less than ±(0.02% or 0.02 pF), whichever is greater.
AGING EFFECTS: None
PIEZOELECTRIC EFFECTS: None
(No capacitance variation with voltage or pressure).
CAPACITANCE DRIFT: ±(0.02% or 0.02 pF), whichever is
greater.
OPERATING TEMPERATURE RANGE:
From -55°C to +125°C (No derating of working voltage).
TERMINATION STYLES: Available in various surface mount
styles. See Mechanical Configurations, page 3.
TERMINAL STRENGTH: Terminations for chips and pellets
withstand a pull of 5 lbs. min., 10 lbs. typical, for 5 seconds in
direction perpendicular to the termination surface of the capac-
itor. Test per MIL-STD-202, method 211.
ATC # 001-806 Rev. L 9/12